Something like the attached Taiten VCTCXO @ 30.72 MHz + ADF4002 Phase Detector/PLL synthesizer might work.  I have no idea how much the oscillator costs.  (The Pletronics oscillator on the UmTRX and the GAPfiller GSM900 isn't available at this frequency.)<div>
 <div><a href="http://www.analog.com/en/rfif-components/pll-synthesizersvcos/adf4002/products/product.html#product-designtools-nav">http://www.analog.com/en/rfif-components/pll-synthesizersvcos/adf4002/products/product.html</a></div>
<div><br></div><div>-Robin</div><div><br><div class="gmail_quote">On Sat, Oct 13, 2012 at 11:54 PM, Alexander Chemeris <span dir="ltr"><<a href="mailto:alexander.chemeris@gmail.com" target="_blank">alexander.chemeris@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">John,<br>
<div><div class="h5"><br>
On Sun, Oct 14, 2012 at 12:24 AM, John Orlando <<a href="mailto:john@epiqsolutions.com">john@epiqsolutions.com</a>> wrote:<br>
> On Sat, Oct 13, 2012 at 4:30 PM, Alexander Chemeris<br>
> <<a href="mailto:alexander.chemeris@gmail.com">alexander.chemeris@gmail.com</a>> wrote:<br>
>> Hi John,<br>
>><br>
>> On Sat, Oct 13, 2012 at 11:11 PM, John Orlando <<a href="mailto:john@epiqsolutions.com">john@epiqsolutions.com</a>> wrote:<br>
>>> On Sat, Oct 13, 2012 at 3:47 PM, Alexander Chemeris<br>
>>> <<a href="mailto:alexander.chemeris@gmail.com">alexander.chemeris@gmail.com</a>> wrote:<br>
>>>> Hi Srdjan,<br>
>>>><br>
>>>> We're looking into re-purposing UmTRX for LTE and there a few things which<br>
>>>> we need to understand better.<br>
>>>><br>
>>>> 1. Is it possible to support 15MHz and 20MHz LTE channel bandwidths? To<br>
>>>> achieve this we at least need to sample at 23.04Msps and 30.72Msps<br>
>>>> respectively. LMS6002D datasheet specifies the maximum I/Q samplerate of<br>
>>>> 14Msps, which is not enough. But at the same time, datasheet claims that ADC<br>
>>>> and DAC are specified up to 50Msps. How does this fits together?<br>
>>><br>
>>> Alexander,<br>
>>> Can you provide a reference to where the datasheet calls out a max I/Q<br>
>>> sample rate of 14 Msps?  The analog low pass filters support a max<br>
>>> bandwidth of 14 MHz (which leads to 28 MHz RF bandwidth assuming<br>
>>> zero-IF operation)...is this what you're referencing?<br>
>><br>
>> The datasheet is not very clear on this topic. I'm referring to the<br>
>> following line at the Table 1:<br>
>> Baseband Bandwidth       14MHz<br>
>><br>
>> Originally I read this line as "digital I/Q bus has limitation of<br>
>> 14Msps" and this is what confuses me.<br>
><br>
> Yes, this refers to the analog baseband filter bandwidth.<br>
<br>
</div></div>Ok, thanks for the clarification.<br>
<div class="im"><br>
>>>  We run the A/D<br>
>>> converters in the LMS6002d at sample rates greater than 14 Msps all<br>
>>> the time, including 30.72 Msps.<br>
>><br>
>> Just to be sure - do you mean you feed RX_CLK and TX_CLK of LMS6002D<br>
>> with 61.44MHz clock? It's divided by 2 internally, so if you feed them<br>
>> with 30.72MHz clock you actually get only 15.36Msps out of LMS6002D.<br>
><br>
> Correct, when running the A/D at 30.72 Msps, the RX_CLK signal needs<br>
> to run at 61.44 MHz.<br>
<br>
</div>Great!<br>
In case you know a good 61.44 MHz oscillator with a reasonable price -<br>
I would appreciate a pointer.<br>
<div class="HOEnZb"><div class="h5"><br>
--<br>
Regards,<br>
Alexander Chemeris.<br>
CEO, Fairwaves LLC / ООО УмРадио<br>
<a href="http://fairwaves.ru" target="_blank">http://fairwaves.ru</a><br>
<br>
</div></div></blockquote></div><br><br clear="all"><div><br></div>-- <br>Robin Coxe  |  Close-Haul Communications, Inc.  |  Boston, MA   <br>+1-617-470-8825<br>
</div></div>