<p>Hi Jean-Samuel.</p>
<p>Please inform us about fabrication progress even there are no issues.</p>
<p>Best regards,<br>
Andrey Sviyazov.<br>
(Sent from my mobile client)</p>
<div class="gmail_quote">12.06.2012 4:48 ÐÏÌØÚÏ×ÁÔÅÌØ "Andrey Sviyazov" <<a href="mailto:andreysviyaz@gmail.com">andreysviyaz@gmail.com</a>> ÎÁÐÉÓÁÌ:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Here PcbDoc file @š12/06/2012š.<div>So, it all done :)</div><div><br clear="all">Best regards,<div>Andrey Sviyazov.</div><br>
<br><br><div class="gmail_quote">2012/6/12 Andrey Sviyazov <span dir="ltr"><<a href="mailto:andreysviyaz@gmail.com" target="_blank">andreysviyaz@gmail.com</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<span>Hi all!</span><div><br></div><div><div><div>Here final project UmTRXv2 @ 12/06/2012 (PcbDoc file will be attached to the next e-mail).</div><div>I found an mistake with non-SMD LED's positions in compare to Ettus where A-B in left-to-right orientation (see picture).</div>


<div>Andrew Karpenkov suggested me to change it because of it is not yet standard but people accustomed to this.</div><div>It is done.</div><div><br></div><div>Also he suggest me to make four test points for RXOUT legs of LMS because he work with this now and found it helpfull.</div>


<div>It is done.
</div><div><br></div><div>Also test points which without connector now referenced as TST and thereforešRefDes of somešconnectors changed.</div><div><br></div><div>Jean-Samuel, please find Gerber files, NC drill and layer stack desription files which usually required to produce PCB.</div>


</div>
<div><br></div></div>Best regards,<div>
Andrey Sviyazov.</div><div><div><br>
<br><br><div class="gmail_quote">2012/6/10 Andrey Sviyazov <span dir="ltr"><<a href="mailto:andreysviyaz@gmail.com" target="_blank">andreysviyaz@gmail.com</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">



Hi all!<div><br></div><div><div>Here final project UmTRXv2 @ 10/06/2012 (PcbDoc file will be attached to the next e-mail).š</div><div>Jean-Samuel, please check SMD LED's placed at the front edge of the PCB.</div><div>



If you agree with this variant then I'll generate Gerber files vs required layers and description to produce PCB.</div>
<div>If anybody find any mistake, please inform me immediatelly.</div></div><div><br clear="all">Best regards,<div>Andrey Sviyazov.</div></div>
</blockquote></div><br>
</div></div></blockquote></div><br></div>
</blockquote></div>