<div><div>Today I used a cheap external active GPS antenna with a thinš5 mšcable (see attached DS), but I had to solderšSMAšconnector instead of unknown to me.š</div><div>The current consumption of the antenna 11Íá @ 3V.š</div>
<div>About 2 minutes after a cold start, the status LED starts blinking 0.5 Hz and 1PPS signal appears at thešClockšoutput connector.š</div><div>So, now we can to start work with the self-tuning of the TCXO.š</div><div><br>
</div><div>Anyway, how realistic in the near time to implement an simple command translator through the FTDI - FPGA for the SPI to each LMS to get at least the signals of their synthesizers (also to UART for GPS, to SPI for DAC of TCXO and etc. :).</div>
<div>It can be a simple protocol with virtualšcontrolšregisters addressing and read/write or a few separate firmwares for each goal.š</div><div>With such a tool at any time we will be able to check UmTRX operation with some simple signals and an spectrum analyzer.š</div>
<div>Also it will be very helpful for the understanding of how to work with LMS control registers, which is poorly described in the documentation.š</div><div>Have any thoughts or suggestions on this?</div></div><div><br></div>
<div>Best regards,<div>Andrey Sviyazov.</div></div>