Hi Alexander,<br><br>Thank you very much for your reply. In this case, it looks good.<br><br>Best regards.<br><br>Jean-Samuel.<br>:-)<br><br><br><div class="gmail_quote">On Tue, Oct 11, 2011 at 3:16 PM, Alexander Chemeris <span dir="ltr"><<a href="mailto:alexander.chemeris@gmail.com">alexander.chemeris@gmail.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Hi Jean-Samuel,<br>
<div class="im"><br>
On Tue, Oct 11, 2011 at 17:11, Jean-Samuel Najnudel - BJT PARTNERS<br>
SARL <<a href="mailto:jsn@bjtpartners.com">jsn@bjtpartners.com</a>> wrote:<br>
> Hi Alexander,<br>
><br>
> I looked at the schematics and PCB. I did not notice anything bad. However,<br>
> I am not really able to check everything.<br>
><br>
> Anyway, I just have two questions.<br>
> 1/ There is a CLKIO connector. As I can see on the schematics. We can set<br>
> this as a clock output (master) or input (slave). This looks perfect if we<br>
> want to synchronize 2 boards together (1 master output connected to 1 slave<br>
> input). If we need to synchronize 3 boards together (trisector<br>
> configuration), how could we connect them together ? Can we split the clock<br>
> output signal to connect it to the 2 slave inputs ? If yes, everything is<br>
> fine. If not, we might need 1 ouput and 1 input on the board (instead of 1<br>
> output or 1 input) to allow us to daisy chain the boards. What do you think?<br>
<br>
</div>Andrey says we can connect 3 to 5 units to a single output easily. We<br>
just need to make a "splitter-cable".<br>
<div class="im"><br>
> 2/ On Image2, I can see 3 components outside the board near the 6 pin<br>
> connector. Is this normal ?<br>
<br>
</div>Yes this is normal, as layout is not 100% finished yet. If there is no<br>
serious objections or additions, we're going to start final layout<br>
iteration immediately. It will take about a week more to polish<br>
everything.<br>
<font color="#888888"><br>
<br>
--<br>
Regards,<br>
Alexander Chemeris.<br>
</font></blockquote></div><br>