This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
jiangwy wyjiang at ljshuoda.comAndrey Sviyazov If I connect X7 between master and slave, then the clock of master is 13MHz and the clock of slave is 26MHz. Is that right? Best regards, Jiang Wenyi From: Andrey Sviyazov Date: 2013-07-23 22:59 To: wyjiang CC: UmTRX Subject: Re: How to syncronizing two UmTRXs Hi Jiang Wenyi. To synchronize clock of several UmTRX you have to leave one of them in master mode, but all others must be switched to slave mode. Master/slave control switch for 26MHz clock is S3(MHz). I/O connector for 26 MHz clock is X7. In case of master mode X7 becomes output and input in case of slave mode. To set master mode turn switch S3 to the downward and to upward for the slave mode. Please find text on the PCB board to be sure. BTW, if you would like to use external clock source then all of UmTRX's must be in slave mode, i.e. their clock connectors must be inputs. Best regards, Andrey Sviyazov. 2013/7/23 jiangwy <wyjiang at ljshuoda.com> Hi All, I have two UmTRXs v2. How to make the clock of them syncronized? Jiang Wenyi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20130724/aa8cf7a1/attachment.htm>