This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
jiangwy wyjiang at ljshuoda.com$ ./kal -s GSM900 linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.004.000-unknown -- Opening a UmTRX device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes UHD Warning: Unable to set the thread priority. Performance may be negatively affected. Please see the general application notes in the manual for instructions. EnvironmentError: OSError: error in pthread_setschedparam UHD Warning: Unable to set the thread priority. Performance may be negatively affected. Please see the general application notes in the manual for instructions. EnvironmentError: OSError: error in pthread_setschedparam kal: Scanning for GSM-900 base stations. -- Loaded /home/gsmrlab/.uhd/cal/rx_iq_cal_v0.1_38.A.csv chan: 9 (936.8MHz - 613Hz) power: 6418.15 chan: 12 (937.4MHz - 620Hz) power: 12117.75 chan: 83 (951.6MHz - 643Hz) power: 6134.54 chan: 84 (951.8MHz - 650Hz) power: 6960.67 chan: 85 (952.0MHz - 637Hz) power: 6300.51 chan: 86 (952.2MHz - 689Hz) power: 6887.63 chan: 88 (952.6MHz - 638Hz) power: 8117.66 chan: 90 (953.0MHz - 675Hz) power: 8154.05 chan: 92 (953.4MHz - 607Hz) power: 19237.80 chan: 93 (953.6MHz - 644Hz) power: 5920.77 chan: 95 (954.0MHz - 599Hz) power: 6156.47 chan: 97 (954.4MHz - 653Hz) power: 6850.15 chan: 99 (954.8MHz - 621Hz) power: 9758.86 chan: 101 (955.2MHz - 611Hz) power: 14142.66 chan: 103 (955.6MHz - 612Hz) power: 8194.55 chan: 105 (956.0MHz - 622Hz) power: 6900.42 chan: 106 (956.2MHz - 605Hz) power: 5699.32 chan: 109 (956.8MHz - 618Hz) power: 6037.80 chan: 110 (957.0MHz - 609Hz) power: 5979.92 chan: 112 (957.4MHz - 621Hz) power: 6714.83 chan: 114 (957.8MHz - 616Hz) power: 7686.20 chan: 116 (958.2MHz - 628Hz) power: 8990.54 chan: 118 (958.6MHz - 627Hz) power: 6750.71 chan: 120 (959.0MHz - 607Hz) power: 6218.47 chan: 124 (959.8MHz - 642Hz) power: 6230.74 jiangwy From: Alexander Chemeris Date: 2013-07-09 23:08 To: wyjiang CC: UmTRX Subject: Re: kalibrate-uhd is OK Does it show proper frequency offset? I suspect it might give wrong offsets due to different sampling frequency. On Tue, Jul 9, 2013 at 12:39 PM, jiangwy <wyjiang at ljshuoda.com> wrote: > I have downloaded the source code from > https://github.com/ttsou/kalibrate-uhd and built it. > It can work. > > By the way, my system is Ubuntu 12.04. > > ________________________________ > jiangwy > > From: Alexander Chemeris > Date: 2013-07-08 18:18 > To: wyjiang > CC: UmTRX > Subject: Re: How to Get libusrp > Jiang, > > libusrp is only used for USRP1, for UmTRX you should use UHD instead > of libusrp. A version of kal with the UHD support is available at > Thomas Tsou's repository, but we have never tested it with UmTRX. > Please let everyone know if you could get it working: > https://github.com/ttsou/kalibrate-uhd > > > > On Mon, Jul 8, 2013 at 2:05 PM, jiangwy <wyjiang at ljshuoda.com> wrote: >> Hi All, >> >> I want to build kal-v0.4.1. >> When use CXXFLAGS='-W -Wall -O3' ./configure >> Output errors: >> >> configure: error: Package requirements (usrp >= 3.3) were not met: >> >> No package 'usrp' found >> >> I'm using ubuntu 12.04. How can I install libusrp? >> ' sudo apt-get install libusrp-dev' not working! >> >> ________________________________ >> Jiang Wenyi > > > > -- > Regards, > Alexander Chemeris. > CEO, Fairwaves LLC / ООО УмРадио > http://fairwaves.ru -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20130710/3d217778/attachment.htm>