This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Alexander Chemeris alexander.chemeris at gmail.comOn Mon, Jul 8, 2013 at 5:58 PM, Thomas Tsou <tom at tsou.cc> wrote: > On Mon, Jul 8, 2013 at 3:33 PM, Andreas Eversberg <andreas at eversberg.eu> wrote: >> Andreas Eversberg wrote: >>> just made osmo-bts ignore that. now i can provision both trx with >>> similar setting, except slot type and and ARFCN. it seems to work now, >>> but i get no rf power on second trx. i use ARFCN and 869 and 877. >>> >> i do also get no reception from the phone at second trx (late >> assignment, my tester showed me power on TS0 uplink). seems that rx and >> tx does not work for some reason. > > If the slots aren't enabled, then both uplink and downlink will be > disabled. This patch should cause Tx slot setting to be ignored and > will send whatever core submits. We need the slot setting to set the > TSC / RACH correlation, so Rx is not as simple. > >> also i found that the transceiver leaks about 2 megabytes every second. >> after some minutes my test machine runs out of mem space. > > Should be resolved in the same patch. Could you please push this to the osmo-trx repository? https://github.com/fairwaves/osmo-trx -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru