Next UmTRXv2 batch

Andrey Sviyazov andreysviyaz at gmail.com
Wed Nov 7 19:04:13 UTC 2012


What about Pb-free for SoHo telecom equips?

Best regards,
Andrey Sviyazov.
(Sent from my mobile client)
07.11.2012 22:55 пользователь "Alexander Chemeris" <
alexander.chemeris at gmail.com> написал:

> On Wed, Nov 7, 2012 at 10:26 PM, Sylvain Munaut <246tnt at gmail.com> wrote:
> >>>> As known, hardware developing impossible without soldering iron.
> >>>> With UmTRXv2 I found that was used very infusible solder paste.
> >>>> As I understand it is due to compliance to Pb-free.
> >>>
> >>> Please note that RoHS is not a requirement in Europe for telecom
> >>> equipment!  So if you have a SMT factory that still uses solder with
> Pb,
> >>> you can avoid those issues.
> >>
> >> You mean it's a requirement only for consumer electronics? Didn't know
> that.
> >
> > The exact rules are a bit more complicated than this, but yes, there
> > is a lot of exemptions from RoHS.
>
> Good to know, thanks!
>
> --
> Regards,
> Alexander Chemeris.
> CEO, Fairwaves LLC / ООО УмРадио
> http://fairwaves.ru
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20121107/48248899/attachment.html>


More information about the UmTRX mailing list