This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Jean-Samuel Najnudel - BJT PARTNERS SARL jsn at bjtpartners.comHi Andrey, I sent the files last week. The fab needs a few days to update its pricing and launch the production process. Anyway, I just called them today. Work is in progress. They will provide me with some updates later this week. They confirm this should not take too much time for production and they will anyway contact me if they need anything. I will let you know asap. Best regards. Jean-Samuel. :-) On Mon, Jun 18, 2012 at 9:49 AM, Andrey Sviyazov <andreysviyaz at gmail.com>wrote: > Hi Jean-Samuel. > > Took another week, but still no news from you. > Could you please inform us about the progress in the production of > prototypes. > > Best regards, > Andrey Sviyazov. > > > > 2012/6/13 Andrey Sviyazov <andreysviyaz at gmail.com> > >> Hi Jean-Samuel. >> >> Please inform us about fabrication progress even there are no issues. >> >> Best regards, >> Andrey Sviyazov. >> (Sent from my mobile client) >> 12.06.2012 4:48 пользователь "Andrey Sviyazov" <andreysviyaz at gmail.com> >> написал: >> >> Here PcbDoc file @ 12/06/2012 . >>> So, it all done :) >>> >>> Best regards, >>> Andrey Sviyazov. >>> >>> >>> >>> 2012/6/12 Andrey Sviyazov <andreysviyaz at gmail.com> >>> >>>> Hi all! >>>> >>>> Here final project UmTRXv2 @ 12/06/2012 (PcbDoc file will be attached >>>> to the next e-mail). >>>> I found an mistake with non-SMD LED's positions in compare to Ettus >>>> where A-B in left-to-right orientation (see picture). >>>> Andrew Karpenkov suggested me to change it because of it is not yet >>>> standard but people accustomed to this. >>>> It is done. >>>> >>>> Also he suggest me to make four test points for RXOUT legs of LMS >>>> because he work with this now and found it helpfull. >>>> It is done. >>>> >>>> Also test points which without connector now referenced as TST and >>>> therefore RefDes of some connectors changed. >>>> >>>> Jean-Samuel, please find Gerber files, NC drill and layer stack >>>> desription files which usually required to produce PCB. >>>> >>>> Best regards, >>>> Andrey Sviyazov. >>>> >>>> >>>> >>>> 2012/6/10 Andrey Sviyazov <andreysviyaz at gmail.com> >>>> >>>>> Hi all! >>>>> >>>>> Here final project UmTRXv2 @ 10/06/2012 (PcbDoc file will be attached >>>>> to the next e-mail). >>>>> Jean-Samuel, please check SMD LED's placed at the front edge of the >>>>> PCB. >>>>> If you agree with this variant then I'll generate Gerber files vs >>>>> required layers and description to produce PCB. >>>>> If anybody find any mistake, please inform me immediatelly. >>>>> >>>>> Best regards, >>>>> Andrey Sviyazov. >>>>> >>>> >>>> >>> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20120618/9e5d0c96/attachment.htm>