Building firmware

Andrew Karpenkov plddesigner at gmail.com
Thu Dec 27 16:38:36 UTC 2012


Hi, Stephane,

You can use any ISE version above 14.1. UmTRX would shipted to you already
flashed. But If you'll spoil UmTRX with a wrong image, you can unbrick it
with JTAG cable only. For this purposes we use Xilinx Platform Cable USB
and  Digilent HS-1.

С уважением,
Андрей Карпенков


2012/12/27 <stephane at shimaore.net>

> Hi,
>
> While I'm waiting for my umtrx to show up, I'm following the "let's play
> newbie" route and trying to use the instructions on
>   https://code.google.com/p/umtrx/wiki/BuildingUHD
>
> I got stuck for a short while on step #2. It would probably be useful
> to add at the beginning of step 2 something like:
>
>     git clone git://github.com/chemeris/UHD-Fairwaves.git
>
>
> Also I see the FPGA instructions use ISE 14.2, should I download that
> version rather than the more recent one (14.4) on Xilinx' site?
>
>
> Finally, is the Ethernet flashing going to work off-the-box on the beta
> umtrx or is it better I buy a JTAG cable? In that later case is the
> Digilent HS-1 the recommended cable?
> S.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20121227/56a66cb0/attachment.html>


More information about the UmTRX mailing list