<div dir="ltr">Hi all,<div>Had some free time this afternoon so I put together a laser cut case for the SIMtrace (photos attached),</div><div>It's just cut out of 2mm perspex, with openings for the cards, flexible SIM adapter, USB and 2.5mm jack. </div><div>They open up from the top for changing the flexible SIM adapters and accessing the buttons / flashing,</div><div>The designs are attached for anyone who has got access to a makerspace or laser cutter wants to make one,</div><div><div><ul><li><b>SimTrace_2mm_box_version_7.dxf </b>is the DXF for the design, should work with any cutting software, file is in MM<br></li><li><b>Simtrace_Final.rld </b>is the RDworks layout with the logo in it (most low end lasers use this software) and it has the nesting & logo baked in (DXF does not have the logo embedded)<br></li><li><b>Osmocom_Logo_No_Gradient.jpg</b> is an adjusted version of the Osmocom logo as the laser CAM software doesn't deal with gradients<br></li></ul></div></div><div>I'm not sure where the best place to put the files are, so others can make their own - on the SIMtrace page on the Wiki or in the Repo itself?</div><div>Cheers,</div><div>Nick</div><div><br></div><div><div><img src="cid:ii_kgyvodew0" alt="image.png" width="538" height="345"><br></div></div><div><div><img src="cid:ii_kgyvt42a2" alt="SIMtrace.png" width="538" height="344"><br></div></div></div>