<div dir="ltr"><div>In a response to "Problem with firmware flashing" thread. </div><div>I couldn't easily reply in the original thread so I am writing in a new one.<br></div><div><br></div><div>Hi Alexander,<br></div><div><br></div><div>As Holger mentioned, it seems that both dfu (the one provided with device and dfu-util) are not compatible with each other. I will try to debug this issue a little bit later.</div><div>Anyway, I was able to flash the board using an older version of dfu-util on Windows 7.</div><div><br></div><div>Here are my steps (on Windows):</div><div>1. Download and unpack dfu-util v0.6 (dfu-util-0.6-win32.zip.bz2) from:</div><div><a href="http://dfu-util.sourceforge.net/releases/">http://dfu-util.sourceforge.net/releases/</a></div><div>2. Install USB drivers (<a href="http://zadig.akeo.ie/">http://zadig.akeo.ie/</a>)</div><div>3. Enter DFU mode (the red LED should turn on)</div><div>4. Flash the device from cmd line</div><div>dfu-util -d 16c0:0762 -R -a0 -D sim_forwarder-simtrace-at91sam7s128-flash_dfu.bin</div><div><br></div><div>On Linux machine I am using the following configuration:</div><div>- Ubuntu 14.04 (natively booted, not VM)</div><div>- dfu-util v0.5</div><div><br></div>-- <br><div class="gmail_signature">BR,<div>Szymon</div></div>
</div>