Hi,<div><br></div><div>> Does your smart card not support T=0, or is the communication <br>> you want to sniff using T=1?<br>> AFAIK T=0 is the most used and supported protocol. T=1 is mainly <br>> if you want to have "high speed" communication.<br><br>I'm interested on both modes. I've SC working in T=0 and other in T=1. On my development environment is common the use of T=1.</div><div>I hope that Harald can solve that...I'm strong interested.</div><div><br></div><div>Thank you very much.</div><div><br></div><div><br>----- Missatge original -----<br>De: Kevin Redon <ml@mail.tsaitgaist.info><br>Data: Dimecres, Novembre 14, 2012 10:24<br>Assumpte: Re: T=0 and T=1 sniffer<br>Per a: simtrace <simtrace@lists.osmocom.org><br><br>> Hi,<br>> <br>> Excerpts from Roger Jardi Cedó's message of Tue Nov 13 23:40:48 <br>> +0100 2012:<br>> > Hello,<br>> > <br>> > I'm sorry, I wanted to refer to ISO 7816-3 smart card (T=0 and <br>> T=1) like Java Card.<br>> > <br>> > > no, not any. It only supports T=0 and T=1 (with few adjustments).<br>> > > This protocols are defined in IEC/ISO-7816 part 3.<br>> > > Other Smart cards can use other protocols (I2C, SPI, …). It may <br>> > > be possible to be compatible with it, but these are not <br>> > > supported by the software.<br>> > <br>> > So, what kind of adjustments are these? Could you please <br>> detail them?<br>> <br>> I don't know exactly, as I never tested.<br>> The hardware is fully compatible.<br>> T=0 and T=1 are quite similar, and I don't know if any <br>> adjustment is required on the firmware.<br>> Maybe the firmware only needs to tell the micro-controller to <br>> switch to T=1, and then it works flawlessly.<br>> Harald Welte would be able to answer this question in more <br>> details, but he is not online before next week.<br>> <br>> Does your smart card not support T=0, or is the communication <br>> you want to sniff using T=1?<br>> AFAIK T=0 is the most used and supported protocol. T=1 is mainly <br>> if you want to have "high speed" communication.<br>> <br>> kevin<br>> <br><br>Roger Jardí<br><br>Personal de Suport a la Recerca<br>Grup de recerca CRISES<br>Departament d'Enginyeria Informàtica i Matemàtiques<br>Universitat Rovira i Virgili<br><br>Despatx 132 <br>Av. Països Catalans 26<br>43007 TARRAGONA<br><br>Tel. +34 977 55 82 70<br><br></div>