<div dir="ltr">Hi, <div><br></div><div>I looked at the forum for answers before posting, but I unfortunately couldn't get answers to what I was looking for. I looked into particular <a href="https://www.mail-archive.com/openbsc@lists.osmocom.org/msg09819.html">https://www.mail-archive.com/openbsc@lists.osmocom.org/msg09819.html</a> for solving my issue. </div><div><br></div><div>Issue: I cannot connect BTS,TRX and BSC. The other modules of the network are able to connect to each other. I have the RSP POWEROFF message originating in log from TRX-UHD module and the BTS module is shuttiing down.  BTS connects via OML but fails to connect RSL.  I looked through the configuration files and seem correct to me. As per the previous email archive, I wanted to login to VTY and check the logs, but, it logs out as the BTS module shuts down (I cannot connect and see what's happening).</div><div><br></div><div><div>Any suggestions would be appreciated on solving the issue. I am trying to create a test 2G OSMOCOM network. Logs are written below and configuration as attachments.</div><div><br></div><div>Thanks for your help! </div></div><div><br></div><div><b>OSMO_BTS_TRX log:</b></div><div>systemd[1]: Started Osmocom osmo-bts for osmo-trx.<br>osmo-bts-trx[23221]: <0017> control_if.c:911 CTRL at 127.0.0.1 4238<br>osmo-bts-trx[23221]: <0010> telnet_interface.c:104 Available via telnet 127.0.0.1 4241<br>osmo-bts-trx[23221]: <0012> input/ipaccess.c:1024 enabling ipaccess BTS mode, OML connecting to <a href="http://192.168.0.9:3002">192.168.0.9:3002</a><br>osmo-bts-trx[23221]: <000b> trx_if.c:1174 phy0.0: Open transceiver<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000d> abis.c:142 Signalling link down<br>osmo-bts-trx[23221]: <0001> bts.c:292 Shutting down BTS 0, Reason Abis close<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: Shutdown timer expired<br>osmo-bts-trx[23221]: ((*))<br>osmo-bts-trx[23221]:   |<br>osmo-bts-trx[23221]:  / \ OsmoBTS<br></div><div><br></div><div><b>OSMO_TRX_UHD log:</b></div><div><pre style="margin:0em">osmo-trx-lms[7995]: DTRXCTRL <0001> Transceiver.cpp:773 [tid=140437098583808][chan=0] command is 'POWEROFF'
osmo-trx-lms[7995]: DTRXCTRL <0001> Transceiver.cpp:918 [tid=140437098583808][chan=0] response is 'RSP POWEROFF 0'</pre><pre style="margin:0em"><br></pre></div></div>