<div dir="ltr"><div>We forgot the most important parameter. The frequency "jump". If the frequency change is large, i.e. from 10 Khz to 1 Ghz, then of course it will take longer for the tuner to equilibrate. In my scanner, when I approach a target I take 10 baby steps of 2 Khz each to zero in. Drift is negligible. I tried using the 5000 us in my scanner, and the results were the same as without it, except for the delay of an additional 50 s. I promptly removed it.<br>
</div><div><br></div><div>The way I see it, tuner needs some time to settle in a new frequency, but there is no fixed delay. It is situation specific and depends highly on the amount of frequency change.</div><div><br></div>
<div>HTH,</div><div>Nikos</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Tue, Jan 14, 2014 at 6:47 PM, Nikos Balkanas <span dir="ltr"><<a href="mailto:nikos.balkanas@eyeonix.com" target="_blank">nikos.balkanas@eyeonix.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><br><div class="gmail_extra"><br><br><div class="gmail_quote"><div class="im">On Tue, Jan 14, 2014 at 5:50 PM,  <span dir="ltr"><<a href="mailto:steve@steve-m.de" target="_blank">steve@steve-m.de</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<div><br>
<br>
On 2014-01-14 15:23, Jiao Xianjun wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Is there any information or hint on the settling time after new<br>
frequency set to dongle?<br>
</blockquote>
<br></div>
That depends a bit on the tuner and the sample FIFO of the RTL2832,<br>
but you need to drop a few buffers, as the PLL of the tuner takes<br>
some time to lock and stabilize.<div><br></div></blockquote></div><div>Sample FiFO should be full at all times in a DVB-T. I have never seen it empty due to interfernce, noise, etc. <br></div><div class="im"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<div>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Can I immediately read samples after new frequency is set by<br>
rtlsdr_set_center_freq? If so, will the samples quality be degraded?<br>
</blockquote>
<br></div>
Kyle Keen did some experiments for his scanning application<br>
(rtl_power), and he settled for waiting a few milliseconds and<br>
flushing the buffer to get optimal results. See here:<br>
<br>
<a href="http://cgit.osmocom.org/rtl-sdr/tree/src/rtl_power.c#n626" target="_blank">http://cgit.osmocom.org/rtl-<u></u>sdr/tree/src/rtl_power.c#n626</a><br>
<br>
Regards,<br>
Steve<br>
<br>
</blockquote></div></div>That's a little too long, making large spectrum tuners inoperable. In my scanner I use a read immediately after the frequency<br>set without any problems. Of course I cannot vouch for correct frequency, but I have noticed that the frequency doesn't drift<br>

</div><div class="gmail_extra">appreciably when resetting frequency and locking to a band.<br><br></div><div class="gmail_extra">BR,<br></div><div class="gmail_extra">Nikos<br></div></div>
</blockquote></div><br></div>