<table id="lhid_shell"><tbody><tr><td id="lhid_rightbox" class="">Just fyi, here's how I did the 4msps wiring hack :<br><br><a href="http://i.imgur.com/TODkU.png">http://i.imgur.com/TODkU.png</a><br><br>Basically use resistors (I used 270R which is a bit high ,between 20 and 10R would bwe better) on the back side on the PCB.<br>
<br>I initially started with wire jumpers on the pins, then moved to resisors on the top but that created a huge loop area with the ground return (there is no gnd on those connection) which was heavily radiating.<br><br>Mounting on the back like that dropped it significantely for me (especially on baseband), but you still clearly see it.<br>
<br>I think the FPGA drive strength on the data pins is still way too high and should be reduced.<br><br>Maybe using spread spectrum on the MCI would be another idea ? <br><br>Cheers,<br><br>    Sylvain<br> <br> <br></td>
</tr></tbody></table>