This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Cinaed Simson cinaed.simson at gmail.comOn 02/08/2018 11:06 PM, Patrick Strasser-Mikhail wrote: > Hi! > > With 'git bisect' you can possibly track this down to a single commit. > > BR > > Patrick Great - I was wondering how to do that without checking out every commit since v0.5.3! Thanks. -- Cinaed > > Am 8. Februar 2018 10:36:26 MEZ schrieb Cinaed Simson > <cinaed.simson at gmail.com>: > > On 02/07/2018 12:25 AM, Bill Gaylord wrote: > > This has to do with the ordering of the set bandwidth function I > believe. (From my experience with it.) because you can set the > bandwidth before the freq is set the chip thinks you are trying > to do stuff before the PLL is locked. Which is actually true. > But this has no real effect on the usage of device from what I > can see. > > > Thanks for the reply. > > In my case, when I use version v0.5git, I can only located 2 independent > GSM channels. > > But when I use v0.5.3, I can locate 13 independent GSM channels. > > I'm using a R820T from noelec > > https://www.nooelec.com/store/nesdr-smart-sdr.html > > I'll make sure I can reproduce the problem on Friday. > > > -- Cinaed > > > > > On Feb 6, 2018, at 10:53 PM, Cinaed Simson > <cinaed.simson at gmail.com> wrote: > > > Hi - there appears to be problem with rtl-sdr with bias T > and the > RTL2832U OEM Rafael Micro R820T tuner. > > I get PLL errors when I try to calibrate it using kal - or > when I use > rtl_test. > > Using device 0: Generic RTL2832U OEM > Found Rafael Micro R820T tuner > Exact sample rate is: 270833.002142 Hz > [R82XX] PLL not locked! > Setting gain: 33.8 dB > > And I get the same error PLL when I run rtl_test. > > If I back out of the latest git version to v0.5.3 it works > correctly - I > can calibrate the dongle using kal and run rtl_test without > any PLL errors. > > This is a known problem? > > -- Cinaed > > > > > > > -- > Diese Nachricht wurde von meinem Android-Gerät mit K-9 Mail gesendet.