This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Marcus Müller marcus.mueller at ettus.comDear Andreas,
the airspy pybombs recipe installs the distribution's "airspy" package,
if you're using an apt-get based distribution (debian, ubuntu), and if
you have deb selected as preferred method (which is the default), and
it's not listed when you run
./pyboms config forcebuild
Best regards,
Marcus
On 05/28/2015 07:46 PM, Dimitri Stolnikov wrote:
> Andreas,
>
> can't tell you anything about pybombs. You should ask on the gnuradio
> mailinglist.
>
> Best regards,
> Dimitri
>
> On Thu, 28 May 2015 09:14:06 +0200, Andreas Ladanyi
> <andreas.ladanyi at gmx.net> wrote:
>
>> Hi Dimitri,
>>
>> doesnt pybombs install the last version of libairspy when download /
>> build gr-osmosdr ???
>>
>> What is the best way to update the libairspy when using pybombs ?
>>
>> By the way iam using an odroid with ubuntu 14.04.
>>
>> cheers,
>> Andy
>>
>>
>> Am 28.05.2015 um 00:06 schrieb Dimitri Stolnikov:
>>> Hi Andreas,
>>>
>>> your libairspy needs an update.
>>>
>>> Best regards,
>>> Dimitri
>>>
>>> On Wed, 27 May 2015 10:03:29 +0200, Andreas Ladanyi
>>> <andreas.ladanyi at gmx.net> wrote:
>>>
>>>> Hi,
>>>>
>>>> iam installing gnuradio 3.7.7.1 and gr-osmosdr with pybombs.
>>>>
>>>> I get the following compiling error:
>>>>
>>>> [ 2%] Building CXX object
>>>> lib/CMakeFiles/gnuradio-osmosdr.dir/airspy/airspy_source_c.cc.o
>>>> /home/odroid/pybombs/src/gr-osmosdr/lib/airspy/airspy_source_c.cc: In
>>>> constructor ‘airspy_source_c::airspy_source_c(const string&)’:
>>>> /home/odroid/pybombs/src/gr-osmosdr/lib/airspy/airspy_source_c.cc:115:45:
>>>> error:
>>>> ‘airspy_get_samplerates’ was not declared in this scope
>>>> airspy_get_samplerates(_dev, &num_rates, 0);
>>>> ^
>>>> /home/odroid/pybombs/src/gr-osmosdr/lib/airspy/airspy_source_c.cc:
>>>> In member
>>>> function ‘virtual double airspy_source_c::set_sample_rate(double)’:
>>>> /home/odroid/pybombs/src/gr-osmosdr/lib/airspy/airspy_source_c.cc:370:56:
>>>> error:
>>>> invalid conversion from ‘uint32_t {aka unsigned int}’ to
>>>> ‘airspy_samplerate_t’ [-fpermissive]
>>>> ret = airspy_set_samplerate( _dev, samp_rate_index );
>>>> ^
>>>> In file included from
>>>> /home/odroid/pybombs/src/gr-osmosdr/lib/airspy/airspy_source_c.h:31:0,
>>>> from
>>>> /home/odroid/pybombs/src/gr-osmosdr/lib/airspy/airspy_source_c.cc:42:
>>>> /usr/local/include/libairspy/airspy.h:126:27: error: initializing
>>>> argument 2 of
>>>> ‘int airspy_set_samplerate(airspy_device*, airspy_samplerate_t)’
>>>> [-fpermissive]
>>>> extern ADDAPI int ADDCALL airspy_set_samplerate(struct
>>>> airspy_device* device,
>>>> airspy_samplerate_t samplerate);
>>>> ^
>>>> make[2]: ***
>>>> [lib/CMakeFiles/gnuradio-osmosdr.dir/airspy/airspy_source_c.cc.o]
>>>> Error 1
>>>> make[1]: *** [lib/CMakeFiles/gnuradio-osmosdr.dir/all] Error 2
>>>> make: *** [all] Error 2
>>>>
>>>> So the gr-osmosdr build/install procedure will not finish.
>>>>
>>>> cheers,
>>>>
>>>> Andy