This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Jay Salsburg jsalsburg at bellsouth.netUse Virtual Audio Cable software to connect Audio from SDR output to VLC player configured as a Media Network Stream Server. http://software.muzychenko.net/eng/vac.htm http://www.videolan.org/vlc/index.html From: osmocom-sdr-bounces at lists.osmocom.org [mailto:osmocom-sdr-bounces at lists.osmocom.org] On Behalf Of IZ8MBW Fabio Sent: Thursday, December 26, 2013 11:21 AM To: osmocom-sdr at lists.osmocom.org Subject: Re: Bandwidth Yes, also with a lower sample rate (1024) the bandwith is too much.... Just to clarify, I use SDR Sharp (SDR#) on a Windows 7 PC (Client side) to connect on the RTL SDR on the Raspberry Pi (Server side). If I use my LAN connection no problem at all, but the bandwith is too much for stream over my Internet Connection (1 Megabit/sec in upload). Obviously I do not want to stream, for example, Wide FM Broadcasting over the Internet beacuse the audio bandwith is very high, but I would like to stream over the Internet the SSB mode (300 Hz to 3400 Hz) where the audio bandwidth is not so much. So how Can I limit the maxium bandwith by using (Server side) the rtl_tcp command? I'm pretty sure that with a bandwith of about 3 kHz and a sample rate of 1024 1 Megabit of Internet bandwith can be enought.... I use also the Perseus SDR receiver (by Microtelecom) with it's Server feature (stream over the Internet) and it works very well, my 1 Megabit of bandwith is enought. 73 Fabio, IZ8MBW www.iz8mbw.net _____ Da: Cristian Paul Peñaranda Rojas <paul at kristianpaul.org> A: IZ8MBW Fabio <iz8mbw at yahoo.it> Cc: osmocom-sdr at lists.osmocom.org Inviato: Giovedì 26 Dicembre 2013 16:37 Oggetto: Re: Bandwidth > Hi again. > I would like to stream the RTL SDR over the Internet. My Internet connection is 1 Megabit in upload (much less than a LAN connection). > Is there a way to decrase or cap the bandwith of rtl_tcp? > In others words: is possible for example limit the audio stream on a bandwith of 300 Hz to 3400 Hz? > > Thanks. > > Fabio, IZ8MBW > Try a lower sample rate ? (-s) _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3462 / Virus Database: 3658/6953 - Release Date: 12/27/13 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/osmocom-sdr/attachments/20131227/00df0688/attachment.htm>