This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Neela Neela soliton33 at live.comHi I am a beginner with RTL and observing that the baseband spectrum is centred at 0 Hz and is asymmetric going from -1 MHz to +1 MHz. How does one filter a part of such a spectrum? For example if signal of interest lied in -300 kHz to -150 kHz. The filtering techniques for typical band pass filters work with positive frequencies and have symmetric frequency selection response. As such a 150 to 300 KHz band pass filter will select signal in both 150 to 300 kHz band as well as from -150 to 300 kHz. Is there a special filtering method available to work with negative frequencies and with an asymmetric baseband spectrum. I am sure this has been addressed as preassumably the FM and other signals of interest are filtered somehow. Any indications will be appreciated. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/osmocom-sdr/attachments/20130808/7deca603/attachment.htm>