<div dir="ltr"><p class="MsoNormal">Dear Osmcom, </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">I am working on a project, where I am connecting OsmoBTS
with OsmocomBB without hardware. </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">I am trying to remove l1 on both sides and connect OsmoBTS with
BB application via simple unix sockets. Based on the further recommendations, I
am using osmobts-trx branch. Currently I am able to handle messages between BTS
and TRX driver on clock and control ports, and on BB side I am in state that
phone wants to connect into a cell (so its waiting for BCCH) . I am now trying
to find a possible way how to handle messages on data port , between BTS – TRX
( TRX is removed, there is my application instead), and forward these messages
to my customized BB l1 interface . The thing is that I need to send to BB phone
(layer23) messages in structures from gsm_04_08.h (i.e.
gsm48_system_information_type_3). I am not sure if I will be able to get needed
from the messages coming on the data port 5702. </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal"> I found, that PCU
creates unix socket on “/tmp/pcu_bts” , but only in case sysmoBTS is in use (please
correct me if I am wrong), so this will be not possible due compilation errors
without HW. Here I found the gsm48_system_information_type_3 messages. </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">So basically I need somehow to get this message structures
on my custom l1 BB interface. Do you have any idea how to do this ? </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Any advice will be highly appreciated. </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Many thanks you for your attention :)</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Best regards, </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Dominik Tamaskovic. </p>

<p class=""> </p></div>