This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-commitlog@lists.osmocom.org/.
gitosis at osmocom.org gitosis at osmocom.orgThis is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 2a4c5fa2b388e6395b0e5d44bbf7ee60c7a82bcb (commit) via 4699ebaa266ddfc2aad341a089c2fddbd87ba7b2 (commit) via 7a6b178fc0af7c90b901db9ec34dd3ff169db042 (commit) via 53216b5d1f2143b4aad73b41c1db483fa9a0fb42 (commit) via 50f8165540e112260790769f0428b10cb783f8e8 (commit) from 61f9158eaffd7f4be76f7a44d803d9ba14988d92 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=2a4c5fa2b388e6395b0e5d44bbf7ee60c7a82bcb commit 2a4c5fa2b388e6395b0e5d44bbf7ee60c7a82bcb Author: Minh-Quang Nguyen <minh-quang.nguyen at nutaq.com> Date: Sat Jun 24 01:08:30 2017 +0200 LC15: properly handle BS-AG-BLKS-RES as received from BSC Closes: OS#2014 Change-Id: Icf437e621d1991f6185e31a0953773309e2bf5ac http://cgit.osmocom.org/osmo-bts/commit/?id=4699ebaa266ddfc2aad341a089c2fddbd87ba7b2 commit 4699ebaa266ddfc2aad341a089c2fddbd87ba7b2 Author: Harald Welte <laforge at gnumonks.org> Date: Sat Jun 24 00:36:54 2017 +0200 l1sap: if lchan is in loopback, don't accept incoming RTP When the lchan is in loopback mode, we loop back all uplink blocks into downlink blocks. We do not processs any RTP frames for that lchan anymore. Rather, we discard those RTP frames to avoid mixing looped-back samples with those received from remote. Change-Id: I29ef4963e9c491c94c413cbc10436a2388c04d9b http://cgit.osmocom.org/osmo-bts/commit/?id=7a6b178fc0af7c90b901db9ec34dd3ff169db042 commit 7a6b178fc0af7c90b901db9ec34dd3ff169db042 Author: Harald Welte <laforge at gnumonks.org> Date: Fri Jun 23 18:57:50 2017 +0200 osmo-bts-sysmo/l1_if.c: PH-DATA.ind belongs to L1P, not L1C L1C is control, while L1P is data primitive. Change-Id: I5a0ef08df96a67cd25b11eb23c60934011b01c29 http://cgit.osmocom.org/osmo-bts/commit/?id=53216b5d1f2143b4aad73b41c1db483fa9a0fb42 commit 53216b5d1f2143b4aad73b41c1db483fa9a0fb42 Author: Harald Welte <laforge at gnumonks.org> Date: Fri Jun 23 21:08:09 2017 +0200 l1sap.c: Factor out function to limit message queue Change-Id: I0fe0fc6b17cefdbf6b2d9f30ed08306998d30687 http://cgit.osmocom.org/osmo-bts/commit/?id=50f8165540e112260790769f0428b10cb783f8e8 commit 50f8165540e112260790769f0428b10cb783f8e8 Author: Harald Welte <laforge at gnumonks.org> Date: Sun Jun 18 13:23:40 2017 +0300 measurement: Remove dead code We used to have trx_meas_check_compute() and call that from the bts-specific code in order to iterate over all timeslots and all lchans in the timeslots if we have to send measurement reports. This was executed once per frame, and created unequal CPU load over time, which in turn might increase different per-ts jitter. Since 2f028c4e2c29f63df9926435466aa35377947767 in April 2017 we have lchan_meas_check_compute(), which performs this on a per-lchan basis, and hence CPU load is distributed over all active timeslots. Change-Id: I6308cefe4a51e55719ea4ed4d613d3782b805c08 ----------------------------------------------------------------------- Summary of changes: include/osmo-bts/measurement.h | 2 -- src/common/l1sap.c | 44 +++++++++++++++++++++-------------------- src/common/measurement.c | 37 ---------------------------------- src/osmo-bts-litecell15/l1_if.c | 2 +- src/osmo-bts-sysmo/l1_if.c | 2 +- 5 files changed, 25 insertions(+), 62 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)