This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-commitlog@lists.osmocom.org/.
gitosis at osmocom.org gitosis at osmocom.orgThis is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 576408b651003ab6cd9da69e3c849ecc4148179e (commit) via e3b8279f26547b3af44fe11e1469a3b185a1278d (commit) via 6feae225eb2a55577a80204153995aabcfd59b77 (commit) via 3cda4ff532d8c4c794c6d111d1a57691b744722e (commit) via 1f45db0ff5b5ee62397ae7da688876d7ce664233 (commit) via 81335edae39e885ca09b027db7216e75d1676ab6 (commit) from 5eb17e28acdd6fba22a1f2e60f4d55aaef18b47a (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=576408b651003ab6cd9da69e3c849ecc4148179e commit 576408b651003ab6cd9da69e3c849ecc4148179e Author: Harald Welte <laforge at gnumonks.org> Date: Thu Jul 13 20:39:50 2017 +0200 VIRT-PHY: cause BTS to terminate in case of recv()/send() on udp socket returns 0 It is important that we reliably terminate the BTS in case any of the VirtPHY multicast sockets dies for whatever reason. Change-Id: I5ae3fdd7cc35fdf235550a3b8362020fdd287c13 http://cgit.osmocom.org/osmo-bts/commit/?id=e3b8279f26547b3af44fe11e1469a3b185a1278d commit e3b8279f26547b3af44fe11e1469a3b185a1278d Author: Harald Welte <laforge at gnumonks.org> Date: Thu Jul 13 17:16:45 2017 +0200 VIRT-PHY: Use IPv4 multicast groups for private / local scope The addresses in the original code make little sense: * 224.0.0.1 is "All systems on this subnet" and not routed outside the local ethernet segment * 225.0.0.1 is in a RESERVED range that shouldn't be used Change-Id: Iba1ae69f3f193a33f1da343c6562f67bd8d3557f http://cgit.osmocom.org/osmo-bts/commit/?id=6feae225eb2a55577a80204153995aabcfd59b77 commit 6feae225eb2a55577a80204153995aabcfd59b77 Author: Sebastian Stumpf <sebastian.stumpf87 at googlemail.com> Date: Tue Feb 28 16:36:36 2017 +0100 VIRT-PHY: Added test option for fast hyperframe repeat. Frame number will restart at 0 after each superframe (approx. 6.1 sec) if enabled. Can be enabled by preprocessor define. Change-Id: If3adf14df5fcd8daf53363c27b3772c42d7122e9 http://cgit.osmocom.org/osmo-bts/commit/?id=3cda4ff532d8c4c794c6d111d1a57691b744722e commit 3cda4ff532d8c4c794c6d111d1a57691b744722e Author: Harald Welte <laforge at gnumonks.org> Date: Wed Jul 12 21:19:06 2017 +0200 VIRT-PHY: Fix handling of default values for vty configuration The defaults must be set during bts_model_phy_link_set_defaults() and can then later be overridden by the vty (from the config file). They should only be written back to the file if they differ from the default settings. Change-Id: I5d7f2c1dc8bc3d11db5c607b664730e4dcd58c96 http://cgit.osmocom.org/osmo-bts/commit/?id=1f45db0ff5b5ee62397ae7da688876d7ce664233 commit 1f45db0ff5b5ee62397ae7da688876d7ce664233 Author: Sebastian Stumpf <sebastian.stumpf87 at googlemail.com> Date: Sat Feb 25 17:18:04 2017 +0100 VIRT-PHY: Fixed timeslot in gsmtap-msg on downlink which was always 0. Timeslot is not encoded in the chan_nr accessible in the channel description but was taken from there and so it was always 0. Change-Id: I881a1c61ea47399c9b1385fb220cd587e3593e82 http://cgit.osmocom.org/osmo-bts/commit/?id=81335edae39e885ca09b027db7216e75d1676ab6 commit 81335edae39e885ca09b027db7216e75d1676ab6 Author: Sebastian Stumpf <sebastian.stumpf87 at googlemail.com> Date: Mon Jan 9 17:34:42 2017 +0100 VIRT-PHY: Added example configurations for openbsc and osmobts. Change-Id: I368d4a378e20028603b09825eee766abb9195774 ----------------------------------------------------------------------- Summary of changes: Makefile.am | 2 + doc/examples/virtual/openbsc-virtual.cfg | 151 +++++++++++++++++++++++++++++++ doc/examples/virtual/osmobts-virtual.cfg | 62 +++++++++++++ src/osmo-bts-virtual/l1_if.c | 20 ++-- src/osmo-bts-virtual/main.c | 4 + src/osmo-bts-virtual/scheduler_virtbts.c | 17 +++- src/osmo-bts-virtual/virtual_um.c | 9 +- src/osmo-bts-virtual/virtual_um.h | 9 +- src/osmo-bts-virtual/virtualbts_vty.c | 4 +- 9 files changed, 257 insertions(+), 21 deletions(-) create mode 100644 doc/examples/virtual/openbsc-virtual.cfg create mode 100644 doc/examples/virtual/osmobts-virtual.cfg hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)