This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-commitlog@lists.osmocom.org/.
gitosis at osmocom.org gitosis at osmocom.orgThis is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, master has been updated via 5c7c1783697bea21f77d64338157bb26c5e5c255 (commit) via 90f7a01d1de4bd915b3999b168535ed6e68e9c50 (commit) via e171425b99b2bf2c21898cfcbd42d3d927721eca (commit) via 4d029d8965022ac0de8488380a62e487a894b9f7 (commit) via 6613331459351489436d9f91129a47750a46020f (commit) via 577cd020c16e8d74d7464ea59157e7a44cbb6683 (commit) via 88bbf1aafd4c5701608a319693a8e69222981eba (commit) via 2cc2ddda41f10ec2f1981c352fae4468cac03237 (commit) from d7610cf0b8148391d80b8991f9f070e635a035b8 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=5c7c1783697bea21f77d64338157bb26c5e5c255 commit 5c7c1783697bea21f77d64338157bb26c5e5c255 Author: Tom Tsou <tom.tsou at ettus.com> Date: Mon May 18 16:51:44 2015 -0700 uhd: Pass UHD command line arguments to constructor Previous behaviour used UHD command line args string for device search, but did not apply the values to the device constructor. Now use the user passed args string for both find and device construction. Signed-off-by: Tom Tsou <tom.tsou at ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=90f7a01d1de4bd915b3999b168535ed6e68e9c50 commit 90f7a01d1de4bd915b3999b168535ed6e68e9c50 Author: Alexander Chemeris <Alexander.Chemeris at gmail.com> Date: Thu Apr 9 18:55:02 2015 +0300 umtrx: Don't use DSP tuning, because LMS6002D PLL steps are small enough. We end up with DSP tuning just for 2-3Hz, which is meaningless and only distort the signal. Signed-off-by: Tom Tsou <tom.tsou at ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=e171425b99b2bf2c21898cfcbd42d3d927721eca commit e171425b99b2bf2c21898cfcbd42d3d927721eca Author: Alexander Chemeris <Alexander.Chemeris at gmail.com> Date: Tue Apr 28 23:09:02 2015 -0400 uhd: Set RF frontend bandwidth for UmTRX to improve signal quality. Signed-off-by: Tom Tsou <tom.tsou at ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=4d029d8965022ac0de8488380a62e487a894b9f7 commit 4d029d8965022ac0de8488380a62e487a894b9f7 Author: Alexander Chemeris <Alexander.Chemeris at gmail.com> Date: Sat Apr 19 17:25:00 2014 +0400 UmTRX: Manually set Tx gain stages for the best signal quality. New UHD versions support split configuration of Tx gain stages. We utilize this to set the gain configuration, optimal for the Tx signal quality. From our measurements, VGA1 must be 18dB plus-minus one and VGA2 is the best when 23dB or lower. Signed-off-by: Tom Tsou <tom.tsou at ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=6613331459351489436d9f91129a47750a46020f commit 6613331459351489436d9f91129a47750a46020f Author: Tom Tsou <tom.tsou at ettus.com> Date: Mon May 18 16:26:33 2015 -0700 build: Provide option for disabling SSE autodetection Setup '--with-sse' option to check system capabilities by default, but allow disabling by the user. Selective SSE build options can be controlled by the user by defining specific HAVE_SSE options. Signed-off-by: Tom Tsou <tom.tsou at ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=577cd020c16e8d74d7464ea59157e7a44cbb6683 commit 577cd020c16e8d74d7464ea59157e7a44cbb6683 Author: Tom Tsou <tom.tsou at ettus.com> Date: Mon May 18 13:57:54 2015 -0700 sigproc: Add clipping detection on RACH and TSC input Alert user of overdriven burst input indicated by a positive threshold detector result. This indication serves as notification that the receive RF gain level is too high for the configured transceiver setup. Signed-off-by: Tom Tsou <tom.tsou at ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=88bbf1aafd4c5701608a319693a8e69222981eba commit 88bbf1aafd4c5701608a319693a8e69222981eba Author: Alexander Chemeris <Alexander.Chemeris at gmail.com> Date: Wed Mar 25 14:22:37 2015 +0300 uhd: Use full DAC scale with UmTRX to improve signal quality. Signed-off-by: Tom Tsou <tom at tsou.cc> http://cgit.osmocom.org/osmo-trx/commit/?id=2cc2ddda41f10ec2f1981c352fae4468cac03237 commit 2cc2ddda41f10ec2f1981c352fae4468cac03237 Author: Tom Tsou <tom at tsou.cc> Date: Mon Apr 6 18:02:56 2015 -0700 build: Add 'subdir-objects' to AM_INIT_AUTOMAKE This will shutup automake and make it stop complaining about the following subdirectory warnings. "warning: source file 'common/fft.c' is in a subdirectory, but option 'subdir-objects' is disabled" Signed-off-by: Tom Tsou <tom at tsou.cc> ----------------------------------------------------------------------- Summary of changes: Transceiver52M/Transceiver.cpp | 12 +++++- Transceiver52M/UHDDevice.cpp | 93 +++++++++++++++++++++++++++++++++++++----- Transceiver52M/sigProcLib.cpp | 29 +++++++++++-- Transceiver52M/sigProcLib.h | 8 ++++ configure.ac | 11 ++++- 5 files changed, 135 insertions(+), 18 deletions(-) hooks/post-receive -- OpenBTS' transceiver retro-fit