This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-commitlog@lists.osmocom.org/.
gitosis at osmocom.org gitosis at osmocom.orgThis is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The annotated tag, fairwaves/0.14.0-fw.1 has been created at c4c613fb7587065bae833100ece6124249aa6a91 (tag) tagging 06d0c6da803a8e46078a241f09ee7244bec013ab (commit) replaces 0.14.0 tagged by Ivan Kluchnikov on Mon Jul 27 14:11:36 2015 +0300 - Log ----------------------------------------------------------------- Fairwaves 0.14.0-fw.1 version. Alexander Chemeris (4): libmsc: Update 'max_power_red' VTY command. libbsc: Abstract out SIs update/generation for a BTS into a separate function. libbsc: Update a BTS's SIs when ms_max_power is changed from VTY. utils: 'meas_json' utility to convert measurement feed into a JSON feed. Andreas Eversberg (12): rtp: Add handling of BFI (Bad Frame Indicatior) of received TRAU frames rtp: Fixed problem of mute audio on some calls Add traffic forwarding via RTP to remote application Allow dynamic RTP payload types between application and MNCC interface Add option to set RADIO LINK TIMEOUT value via VTY Send RADIO LINK TIMEOUT value via OML attribute to BTS Add check for non existing lchan at tch_frame_down() Drop bad speech frames rather than forwarding them via RTP Add full AMR multirate IE support with VTY config for MS and BTS side Fix: If paging for half rate was requested, use hr, if supported by MS If requested TCH/H channel is not available, try assigning TCH/F osmo-nitb support for codec negotiation Holger Hans Peter Freyther (60): debian: We are at version 0.14 now rtp: Use osmocom/netif/rtp.h for the rtp structure definition rtp: Catch up with the removal of the rtp.h rtp: And really catch up and remove all occurences of openbsc/rtp.h rtp: Fix memory leak fixed by Andreas without mentioning it write_queue: Check the result of osmo_wqueue_enqueue and free libmgcp: Fail if transcoding can't be configured bsc: Allow to use different LAC/CI for the core-network bsc: In preparation to the MT lac/ci patching split the code bsc: Change paging strategy based on override or not bts: "Repair" broken channels if we receive the release ack nat: The reject cause of "-1" has failure meaning, change it nat: Inform others if an IMSI is rejected nat: Add a ctrl command to add to an existing ACC list nat: Add ctrl command to save the configuration nat: Check the con->imsi for the tracked IMSI nat: Check for the access list in set command as well debian: meas2pcap requires libpcap-dev unconditionally misc: Fix warnings about size of size_t in printf sgsn/gtp: Fill out the optional RAT type nat: Make mode-set patching optional mgcp: Ignore the case for finding a codec mgcp: Allow to disable transcoding for trunks debian: Do not depend on shared libraries directly mncc: Select the codec similar to the modify handling sub: Remove paging requests before dispatching sub: Remove introspection of the "channel queue" sub: Remove the queue from the subscriber code Merge branch 'zecke/features/no-queue' mgcp: Fix compiler warning on 64bit builds filter: Move the gsm 04.08 filter to a common place filter: Move the method definition to the filter module filter: Move the access list management around filter: Move VTY code into the filter module filter: Cease out "struct bsc_nat" from the API filter: Remove nat from bsc_nat_acc_lst and replace with msg filter: Rename BSC to LOCAL and NAT to GLOBAL filter: More renaming and remove of "NAT" from it filter: Separate SCCP/BSSAP extraction and gsm48 code filter: Remove NAT knowledge from auth_imsi filter: Put all the parameters in a struct to avoid order issues filter: Remove the bsc_connection from the internal functions filter: Remove nat_sccp_connection from public API filter: Remove bsc_connection from the filter API filter: Move from DNAT to DFILTER category filter: Move the con_type into the filter_state bsc: Add access lists to the MSC and the BSC bsc: Add access list filtering to the BSC bsc: Send a LU Reject in case it has been filtered Merge branch 'zecke/features/acc-list' gsup: Document passing MSISDN as part of the response gsup: Specify the QoS service for the PDP info gsup: Extract the new MSISDN string gsup: Extract the QoS field sgsn: Copy the msisdn to the sgsn_data and use it in PDP activation sgsn: Store subscribed QoS and attempt to use it sgsn: Handle different levels of QoS sgsn: Dump the E164 (encoded) assigned to the subscriber sgsn: Show the QoS that has been assigned Merge branch 'zecke/features/gprs-gsup-fixes' Ivan Kluchnikov (6): gsm_04_08: Use osmo_assert for transt->conn and conn only in case of paging succeeded debian: build only osmo-nitb package debian: Add osmocom-meas-utils package debian: osmocom-meas-utils should not depend on -dev packages sub: Add the ability to set prefix for randomly generated extensions debian: Update changelog to 0.14.0-fw.1 Jacob Erlbeck (6): nat: Fix timeslot range in 'show bsc mgcp' VTY command gprs: Fix GSUP cancel_type handling (Coverity) nitb: Check source string length before calling strncpy (Coverity) nitb: Fix IMSI/IMEI buffer handling (Coverity) mgcp: Move assignment of src_codec downwards mgcp/test: Fix mgcp-transcoding assertion (Coverity) Max (1): ignore debian build byproducts ----------------------------------------------------------------------- hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)