<div dir="ltr">Hello Harald!<div><br></div><div>Today I was able to get hardware working. At least L2 link established and I see OML/NM messages.</div><div>Files are attached.</div><div><br></div><div>Briefly the problem was with ports connections. I did not expected that quad-port card requires all ports to be connected. Everything started to work after I placed dummy loopback connectors to unused ports 3 and 4.</div><div>After it I was able to check physical link with e1-prbs-test and was able to communicate with BTS.</div><div><br></div><div>Thank you</div><div>Babanov Ivan</div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">пн, 12 окт. 2020 г. в 12:20, Harald Welte <<a href="mailto:laforge@gnumonks.org">laforge@gnumonks.org</a>>:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Dear Ivan,<br>
<br>
On Mon, Oct 12, 2020 at 12:26:22AM +0300, Ivan Babanov wrote:<br>
> I heard that it happens on some hardware with Digium cards, I'll try<br>
> tomorrow to change PCI slot to avoid sharing one IRQ with USB<br>
> devices, maybe disable USB at all. If it doesn't help, I'll try a new<br>
> server with different HW.<br>
<br>
I'm sorry but I think you are looking at the wrong level.  I doubt that<br>
the hardware is the problem.<br>
<br>
If you are worried about the hardware/OS/drivers, just use a loopback E1<br>
cable between two ports and run e1-prbs-test (from osmo-e1d/contrib) on<br>
both sides to see if you can communicate between two ports.  If that<br>
works, you can exclude any problems related to hardware or drivers.<br>
<br>
If you have connceted span 1 + 2 via loopback, start<br>
<br>
in one shell:<br>
        e1-prbs-test /dev/dahdi/chan/001<br>
<br>
in another shell:<br>
        e1-prbs-test /dev/dahdi/chan/002<br>
<br>
and check the stdout to see if they find sync in both direction.<br>
<br>
This program sends pseudo-random bit sequences over every timeslot and<br>
checks that the correct PRBS sequence arrives on the other side,<br>
bidirectionally.<br>
<br>
Regards,<br>
        Harald<br>
-- <br>
- Harald Welte <<a href="mailto:laforge@gnumonks.org" target="_blank">laforge@gnumonks.org</a>>           <a href="http://laforge.gnumonks.org/" rel="noreferrer" target="_blank">http://laforge.gnumonks.org/</a><br>
============================================================================<br>
"Privacy in residential applications is a desirable marketing option."<br>
                                                  (ETSI EN 300 175-7 Ch. A6)<br>
</blockquote></div>