<div dir="ltr"><div class="gmail_quote"><div dir="ltr">Hi, <div><br></div><div>I looked at the forum for answers before posting, but I unfortunately couldn't get answers to what I was looking for. I looked into particular <a href="https://www.mail-archive.com/openbsc@lists.osmocom.org/msg09819.html" target="_blank">https://www.mail-archive.com/openbsc@lists.osmocom.org/msg09819.html</a> for solving my issue. </div><div><br></div><div>Setup: USRP B210 as radio head. NITB modules as components for 2G Network and BTS-TRX and TRX-UHD modules. </div><div>Issue: </div><div><ul><li>TRX-UHD and BTS-TRX fail. NITB Module works. Components of NITB network are able to connect to each other. </li><li>I have the RSP POWEROFF message originating in log from TRX-UHD module and the BTS module is shuttiing down. </li><li>BTS connects via OML but fails to connect RSL. </li><li>As per the previous email archive, I wanted to login to VTY and check the logs, but, it logs out as the BTS module shuts down (I cannot connect and see what's happening).</li></ul></div><div>I looked through the configuration files and seem correct to me. Any suggestions would be appreciated on solving the issue. I am trying to create a test 2G OSMOCOM network. Logs are written below and configuration as attachments.</div><div><div><br></div><div>Thanks for your help! </div></div><div><br></div><div><b>OSMO_BTS_TRX log:</b></div><div>systemd[1]: Started Osmocom osmo-bts for osmo-trx.<br>osmo-bts-trx[23221]: <0017> control_if.c:911 CTRL at 127.0.0.1 4238<br>osmo-bts-trx[23221]: <0010> telnet_interface.c:104 Available via telnet 127.0.0.1 4241<br>osmo-bts-trx[23221]: <0012> input/ipaccess.c:1024 enabling ipaccess BTS mode, OML connecting to <a href="http://192.168.0.9:3002" target="_blank">192.168.0.9:3002</a><br>osmo-bts-trx[23221]: <000b> trx_if.c:1174 phy0.0: Open transceiver<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: <000d> abis.c:142 Signalling link down<br>osmo-bts-trx[23221]: <0001> bts.c:292 Shutting down BTS 0, Reason Abis close<br>osmo-bts-trx[23221]: <000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)<br>osmo-bts-trx[23221]: Shutdown timer expired<br>osmo-bts-trx[23221]: ((*))<br>osmo-bts-trx[23221]: |<br>osmo-bts-trx[23221]: / \ OsmoBTS<br></div><div><br></div><div><b>OSMO_TRX_UHD log:</b></div><div><pre style="margin:0em"> ubuntu-HP-EliteBook-8470p systemd[1]: Started Osmocom SDR BTS L1 Transceiver (UHD Backend).<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:21 2020 DLGLOBAL <0007> telnet_interface.c:104 Available via telnet 127.0.0.1 4237<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:21 2020 DLCTRL <000e> control_if.c:911 CTRL at 127.0.0.1 4236<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:21 2020 DMAIN <0000> osmo-trx.cpp:485 [tid=140554411180864] Config Settings<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Log Level............... 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Device args.............<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: TRX Base Port........... 5700<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: TRX Address............. 127.0.0.1<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: GSM BTS Address......... 127.0.0.1<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Channels................ 1<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Tx Samples-per-Symbol... 4<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Rx Samples-per-Symbol... 4<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: EDGE support............ 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Extended RACH support... 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Reference............... 1<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Filler Burst Type....... Empty bursts<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Filler Burst TSC........ 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Filler Burst RACH Delay. 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Multi-Carrier........... 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Tuning offset........... 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: RSSI to dBm offset...... 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Swap channels........... 0<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Tx Antennas............. '<default>'<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Rx Antennas............. '<default>'<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:21 2020 DMAIN <0000> osmo-trx.cpp:439 [tid=140554411180864] Setting SCHED_RR priority 18<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release<br> ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:21 2020 DDEV <0005> UHDDevice.cpp:470 [tid=140554411180864] Using discovered UHD device type=b200,name=MyB210,serial=31A92EA,product=B210<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:22 2020 DDEVDRV <0006> b200_impl.cpp:386 [tid=140554300024576] [B200] Detected Device: B210<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:22 2020 DDEVDRV <0006> b200_impl.cpp:433 [tid=140554300024576] [B200] Operating over USB 2.<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:22 2020 DDEVDRV <0006> b200_impl.cpp:587 [tid=140554300024576] [B200] Initialize CODEC control...<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:650 [tid=140554300024576] [B200] Initialize Radio control...<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:957 [tid=140554300024576] [B200] Performing register loopback test...<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:966 [tid=140554300024576] [B200] Register loopback test passed<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:957 [tid=140554300024576] [B200] Performing register loopback test...<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:966 [tid=140554300024576] [B200] Register loopback test passed<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:758 [tid=140554300024576] [B200] Setting master clock rate selection to 'automatic'.<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:1013 [tid=140554300024576] [B200] Asking for clock rate 16.000000 MHz...<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:1024 [tid=140554300024576] [B200] Actually got clock rate 16.000000 MHz.<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DMAIN <0000> UHDDevice.cpp:214 [tid=140554411180864] Antennas configured successfully<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> multi_usrp.cpp:502 [tid=140554300024576] [MULTI_USRP] Setting master clock rate selection to 'manual'.<br>huhti 09 11:22:23 ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:23 2020 DDEVDRV <0006> b200_impl.cpp:1013 [tid=140554300024576] [B200] Asking for clock rate 26.000000 MHz...<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DDEVDRV <0006> b200_impl.cpp:1024 [tid=140554300024576] [B200] Actually got clock rate 26.000000 MHz.<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DDEV <0005> UHDDevice.cpp:275 [tid=140554411180864] Rates configured for B210 4 SPS<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DDEV <0005> UHDDevice.cpp:235 [tid=140554411180864] Supported Tx gain range [0; 89.75]<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DDEV <0005> UHDDevice.cpp:240 [tid=140554411180864] Supported Rx gain range [0; 76]<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DDEV <0005> UHDDevice.cpp:244 [tid=140554411180864] Default setting Tx gain for channel 0 to 44.875<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DDEV <0005> UHDDevice.cpp:251 [tid=140554411180864] Default setting Rx gain for channel 0 to 38<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DDEV <0005> UHDDevice.cpp:569 [tid=140554411180864] Device configuration: Single USRP:<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Device: B-Series Device<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Mboard 0: B210<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: RX Channel: 0<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: RX DSP: 0<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: RX Dboard: A<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: RX Subdev: FE-RX2<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: TX Channel: 0<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: TX DSP: 0<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: TX Dboard: A<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: TX Subdev: FE-TX2<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DMAIN <0000> Threads.cpp:119 [tid=140554180474624] Thread 140554180474624 (task 8317) set name: CtrlService0<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DMAIN <0000> osmo-trx.cpp:533 [tid=140554411180864] -- Transceiver active with 1 channel(s)<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:24 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:28 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:28 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:33 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:33 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:38 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:38 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:43 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:43 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:49 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:49 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:54 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:54 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:59 2020 DTRXCTRL <0002> Transceiver.cpp:778 [tid=140554180474624][chan=0] command is 'POWEROFF'<br>ubuntu-HP-EliteBook-8470p osmo-trx-uhd[8282]: Thu Apr 9 11:22:59 2020 DTRXCTRL <0002> Transceiver.cpp:923 [tid=140554180474624][chan=0] response is 'RSP POWEROFF 0'<br></pre><pre style="margin:0em"><br></pre></div></div>
</div></div>