<div dir="ltr">Hello dears!<div>I try to connect 2 STPs to each other via Sigtran M3UA protocol.</div><div>But I don't understand, why my connection is fault. Could you please check my configuration?</div><div>  STP1                              STP2<br>  point-code 0.12.4           point-code 0.12.4<br>  port 2905                        port 2906<br>  IP 172.18.141.1              IP 172.18.142.2<br></div><div><br></div><div>Me configuration is:</div><div><br></div><div>STP1 <br></div><div>cs7 instance 1<br></div><div> network-indicator reserved<br> point-code 0.12.4<br> asp stp2 2906 2905 m3ua<br>  local-ip 172.18.141.1<br>  remote-ip 172.18.142.2<br>  role asp<br>  sctp-role client<br> as stp2 m3ua<br>  asp stp2<br>  traffic-mode override<br>  routing-key 0 0.25.0<br> route-table system<br> <br></div><div>STP2</div><div>cs7 instance 1<br> network-indicator reserved<br> point-code 0.25.0<br> asp stp1 2905 2906 m3ua<br>  local-ip 172.18.142.2<br>  remote-ip 172.18.141.1<br>  role sg<br> as stp1 m3ua<br>  asp stp1<br>  traffic-mode override<br>  routing-key 0 0.12.4<br> route-table system<br> listen m3ua 2906<br>  accept-asp-connections dynamic-permitted<br></div><div><br></div><div>Thanks in advance!</div><div><br></div></div>