<div dir="auto"><div style="font-family:sans-serif;font-size:13.696px" dir="auto"><div style="margin:16px 0px"><div><div dir="ltr"><div><div><div><div>hi dear<br></div>I install openbsc, osmosgsn, ggsn, osmo-trx, osmo-bts-trx, osmo-pcu and dependency from master branch step by step from <a href="https://osmocom.org/projects/cellular-infrastructure/wiki/OpenBSC_GPRS" style="text-decoration:none;color:rgb(66,133,244)">this link.</a><br><br></div><div>but when run osmo-nitb, osmo-trx and osmo-bts-trx, mobile connect to network but no access to network.<br></div><div>(I used USRP N210/B210, ubuntu 15.10/16.10 64x)<br></div><div><br>osmo-nitb log:<br> <br>20170130041914525 DRLL <0000> chan_alloc.c:352 (bts=0,trx=0,ts=0,pchan=CCCH+S<wbr>DCCH4) Allocating lchan=0 as SDCCH<br>20170130041914525 DRSL <0004> abis_rsl.c:1819 (bts=0,trx=0,ts=0,ss=0) Activating ARFCN(0) SS(0) lctype SDCCH r=LOCATION_UPDATE ra=0x05 ta=0<br>20170130041914525 DRSL <0004> abis_rsl.c:580 (bts=0,trx=0,ts=0,pchan=CCCH+S<wbr>DCCH4) Tx RSL Channel Activate with act_type=INITIAL<br>20170130041914525 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state NONE -> ACTIVATION REQUESTED<br>20170130041914525 DRSL <0004> abis_rsl.c:1546 (bts=0,trx=0,ts=0,ss=0) CHANNEL ACTIVATE ACK<br>20170130041914525 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state ACTIVATION REQUESTED -> ACTIVE<br>20170130041924529 DRSL <0004> abis_rsl.c:852 (bts=0,trx=0,ts=0,ss=0) RF Channel Release due to error: 1<br>20170130041924529 DRSL <0004> abis_rsl.c:762 (bts=0,trx=0,ts=0,ss=0) DEACTivate SACCH CMD<br>20170130041924529 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state ACTIVE -> RELEASE DUE ERROR<br>20170130041924530 DRSL <0004> abis_rsl.c:925 (bts=0,trx=0,ts=0,ss=0) RF CHANNEL RELEASE ACK<br>20170130041926530 DRSL <0004> abis_rsl.c:811 (bts=0,trx=0,ts=0,ss=0) is back in operation.<br>20170130041926531 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state RELEASE DUE ERROR -> NONE<br><br></div>NITB config:<br><br>!<br>! OpenBSC (0.15.0.646-f1886-dirty) configuration saved from vty<br>!!<br>password foo<br>!<br>log stderr<br>  logging filter all 1<br>  logging color 1<br>  logging print category 1<br>  logging print extended-timestamp 1<br>  logging level all everything<br>  logging level rll debug<br>  logging level cc debug<br>  logging level mm info<br>  logging level rr info<br>  logging level rsl debug<br>  logging level nm debug<br>  logging level mncc debug<br>  logging level pag debug<br>  logging level meas notice<br>  logging level sccp notice<br>  logging level msc notice<br>  logging level mgcp notice<br>  logging level ho notice<br>  logging level db notice<br>  logging level ref notice<br>  logging level gprs notice<br>  logging level ns info<br>  logging level bssgp notice<br>  logging level llc notice<br>  logging level sndcp notice<br>  logging level nat notice<br>  logging level ctrl notice<br>  logging level smpp notice<br>  logging level filter notice<br>  logging level ranap debug<br>  logging level sua debug<br>  logging level lglobal notice<br>  logging level llapd notice<br>  logging level linp notice<br>  logging level lmux notice<br>  logging level lmi notice<br>  logging level lmib notice<br>  logging level lsms notice<br>  logging level lctrl notice<br>  logging level lgtp notice<br>  logging level lstats notice<br>  logging level lgsup notice<br>  logging level loap notice<br>!<br>stats interval 5<br>!<br>line vty<br> no login<br>!<br>e1_input<br> e1_line 0 driver ipa<br> e1_line 0 port 0<br> no e1_line 0 keepalive<br> ipa bind 127.0.0.1<br>network<br> network country code 432<br> mobile network code 70<br> short name dynch<br> long name dynch<br> auth policy accept-all<br> authorized-regexp .*<br> location updating reject cause 13<br> encryption a5 0<br> neci 1<br> paging any use tch 0<br> rrlp mode none<br> mm info 1<br> handover 0<br> handover window rxlev averaging 10<br> handover window rxqual averaging 1<br> handover window rxlev neighbor averaging 10<br> handover power budget interval 6<br> handover power budget hysteresis 3<br> handover maximum distance 9999<br> timer t3101 10<br> timer t3103 0<br> timer t3105 0<br> timer t3107 0<br> timer t3109 4<br> timer t3111 0<br> timer t3113 60<br> timer t3115 0<br> timer t3117 0<br> timer t3119 0<br> timer t3122 10<br> timer t3141 0<br> subscriber-keep-in-ram 0<br> bts 0<br>  type sysmobts<br>  band GSM900<br>  cell_identity 0<br>  location_area_code 1<br>  base_station_id_code 63<br>  ms max power 15<br>  cell reselection hysteresis 4<br>  rxlev access min 0<br>  periodic location update 30<br>  radio-link-timeout 32<br>  channel allocator ascending<br>  rach tx integer 9<br>  rach max transmission 7<br>  channel-descrption attach 1<br>  channel-descrption bs-pa-mfrms 5<br>  channel-descrption bs-ag-blks-res 1<br>  early-classmark-sending forbidden<br>  ip.access unit_id 1800 0<br>  oml ip.access stream_id 255 line 0<br>  neighbor-list mode automatic<br>  codec-support fr<br>  gprs mode gprs<br>  gprs 11bit_rach_support_for_egprs 0<br>  gprs routing area 0<br>  gprs network-control-order nc1<br>  gprs cell bvci 1800<br>  gprs cell timer blocking-timer 3<br>  gprs cell timer blocking-retries 3<br>  gprs cell timer unblocking-retries 3<br>  gprs cell timer reset-timer 3<br>  gprs cell timer reset-retries 3<br>  gprs cell timer suspend-timer 10<br>  gprs cell timer suspend-retries 3<br>  gprs cell timer resume-timer 10<br>  gprs cell timer resume-retries 3<br>  gprs cell timer capability-update-timer 10<br>  gprs cell timer capability-update-retries 3<br>  gprs nsei 1800<br>  gprs ns timer tns-block 3<br>  gprs ns timer tns-block-retries 3<br>  gprs ns timer tns-reset 3<br>  gprs ns timer tns-reset-retries 3<br>  gprs ns timer tns-test 30<br>  gprs ns timer tns-alive 3<br>  gprs ns timer tns-alive-retries 10<br>  gprs nsvc 0 nsvci 1800<br>  gprs nsvc 0 local udp port 23000<br>  gprs nsvc 0 remote udp port 23000<br>  gprs nsvc 0 remote ip 127.0.0.1<br>  gprs nsvc 1 nsvci 0<br>  gprs nsvc 1 local udp port 0<br>  gprs nsvc 1 remote udp port 0<br>  gprs nsvc 1 remote ip 0.0.0.0<br>  no force-combined-si<br>  trx 0<br>   rf_locked 0<br>   arfcn 0<br>   nominal power 23<br>   max_power_red 0<br>   rsl e1 tei 0<br>   timeslot 0<br>    phys_chan_config CCCH+SDCCH4<br>    hopping enabled 0<br>   timeslot 1<br>    phys_chan_config TCH/F<br>    hopping enabled 0<br>   timeslot 2<br>    phys_chan_config TCH/F<br>    hopping enabled 0<br>   timeslot 3<br>    phys_chan_config TCH/F<br>    hopping enabled 0<br>   timeslot 4<br>    phys_chan_config PDCH<br>    hopping enabled 0<br>   timeslot 5<br>    phys_chan_config PDCH<br>    hopping enabled 0<br>   timeslot 6<br>    phys_chan_config PDCH<br>    hopping enabled 0<br>   timeslot 7<br>    phys_chan_config PDCH<br>    hopping enabled 0<br>mncc-int<br> default-codec tch-f fr<br> default-codec tch-h hr<br>nitb<br> subscriber-create-on-demand<br> assign-tmsi<br><br></div>OSMO-BTS-TRX Config file<br><br>!<br>! OsmoBTS (0.4.0.372-f65b) configuration saved from vty<br>!!<br>!<br>log stderr<br>  logging filter all 1<br>  logging color 0<br>  logging print category 1<br>  logging print extended-timestamp 1<br>  logging level all everything<br>  logging level rsl debug<br>  logging level oml debug<br>  logging level rll notice<br>  logging level rr notice<br>  logging level meas notice<br>  logging level pag info<br>  logging level l1c debug<br>  logging level l1p info<br>  logging level dsp debug<br>  logging level pcu notice<br>  logging level ho notice<br>  logging level trx notice<br>  logging level loop notice<br>  logging level abis notice<br>  logging level rtp notice<br>  logging level sum notice<br>  logging level lglobal notice<br>  logging level llapd debug<br>  logging level linp notice<br>  logging level lmux notice<br>  logging level lmi notice<br>  logging level lmib notice<br>  logging level lsms notice<br>  logging level lctrl notice<br>  logging level lgtp notice<br>  logging level lstats notice<br>  logging level lgsup notice<br>  logging level loap notice<br>!<br>line vty<br> no login<br>!<br>e1_input<br> e1_line 0 driver ipa<br> e1_line 0 port 0<br> no e1_line 0 keepalive<br>phy 0<br> osmotrx ip 127.0.0.1<br> osmotrx fn-advance 20<br> osmotrx rts-advance 5<br> osmotrx tx-attenuation oml<br> instance 0<br>bts 0<br> band GSM900<br> ipa unit-id 1800 0<br> oml remote-ip 127.0.0.1<br> rtp jitter-buffer 100<br> paging queue-size 200<br> paging lifetime 0<br> uplink-power-target -75<br> min-qual-rach 50<br> min-qual-norm -5<br> no ms-power-loop<br> timing-advance-loop<br> trx 0<br>  power-ramp max-initial 23000 mdBm<br>  power-ramp step-size 2000 mdB<br>  power-ramp step-interval 1<br>  ms-power-control dsp<br>  phy 0 instance 0<br><br></div>Regards</div></div></div></div></div>