<p dir="ltr">Hi Keith,</p>
<p dir="ltr">On May 5, 2016 6:02 PM, "Keith" <<a href="mailto:keith@rhizomatica.org">keith@rhizomatica.org</a>> wrote:<br>
><br>
> They generate constant bursts on the uplink, and this is what I can see<br>
> that corresponds from osmo-bts log output:<br>
><br>
> <0000> ../../../../osmo-bts/src/common/rsl.c:1642<br>
> (bts=0,trx=0,ts=0,ss=0) Handing RLL msg UNIT_DATA_IND from LAPDm to MEAS REP<br>
> <0000> ../../../../osmo-bts/src/common/rsl.c:1592<br>
> (bts=0,trx=0,ts=0,ss=0) Tx MEAS RES</p>
<p dir="ltr">MEAS RES means that there is an open logical channel between the phone and the BTS. Have you looked at the list of open channels at the NITB VTY?</p>
<p dir="ltr">> I might also mention that this phone fails the USSD *#100# own number<br>
> request - The message "Not Successful"  appears on the screen very<br>
> quickly if not immediately after pressing send. There is no network<br>
> communication that I can detect.</p>
<p dir="ltr">Just a suggestion - is the phone network or SIM locked?</p>
<p dir="ltr">If it's locked, it may try to send some message to the network to verify that it's connected to an allowed operator.</p>
<p dir="ltr">A useful log would be a pcap trace of communication between OpenBSC and OsmoBTS (make sure osmo-trx communication is filtered out).</p>
<p dir="ltr">--<br>
Regards,<br>
Alexander Chemeris<br>
CEO Fairwaves, Inc.<br>
<a href="https://fairwaves.co">https://fairwaves.co</a></p>