<p dir="ltr">Hi Norbert,</p>
<p dir="ltr">07 июля 2014 г. 15:40 пользователь "Norbert Englberger" <<a href="mailto:Norbert.Englberger@unibw.de">Norbert.Englberger@unibw.de</a>> написал:<br>
><br>
> 2. I have been asked if I could enable "Frequency Hopping"<br>
> Right now I already fail to bring up a second TRX with OpenBSC.<br>
> I start 2 instances of "osmo-trx" with 2 differents IP-Addresses but the<br>
> same port, after that I start "osmobts-trx" with the "-t 2" parameter.<br>
> OpenBSC seems to see both USRPs but the LED'S an the USRPs indicate that<br>
> only one is completely powered up and transmitting (a quick check with an<br>
> Motorola with RSSI also shows only one ARFC).<br>
> So how do I have to start  "osmo-trx" to enable transmitting on both URSPs<br>
> as TRX0 and TRX1 in one BTS?<br>
> After that, is it possible to configure "Frequency hopping" with this setup?<br>
> (Because when I changed the value "hopping enabled" of the timeslots in<br>
> open-bts.cfg to "1" I get a message that this type of BTS does not support<br>
> hopping)</p>
<p dir="ltr">Using two osmo-trx's or two devices with a single osmo-trx is not supported at this moment and there are no current plans to support this configuration, AFAIK.</p>
<p dir="ltr">That said, we're working on supporting frequency hopping with a single device. I expect this to be ready for testing in the next few months.</p>
<p dir="ltr">Please excuse typos. Written with a touchscreen keyboard.</p>
<p dir="ltr">--<br>
Regards,<br>
Alexander Chemeris<br>
CEO Fairwaves, Inc.<br>
<a href="https://fairwaves.co">https://fairwaves.co</a></p>