Phew ! why do you need to do this at all ?<div><br></div><div>To avoid RF emission ? even using this method you will still leak out enough RF which you can easily use the MS over the air.<br><br><div class="gmail_quote">On Thu, Oct 25, 2012 at 11:21 PM, Andrew Back <span dir="ltr"><<a href="mailto:andrew@carrierdetect.com" target="_blank">andrew@carrierdetect.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hello,<br>
<br>
I'd like to directly cable a handset to a nanoBTS and thought I could:<br>
<br>
- put attenuators on the nanoBTS TX and RX ports<br>
- connect the other side of each attenuator to a resistive<br>
splitter/combiner that has 6dB loss<br>
- connect the combiner common port to the MS<br>
<br>
Does this sound sensible and if so what size of attenuators might I<br>
want assuming MS and BTS were each set at 6dBm? I've seen figures for<br>
receiver sensitivity, but wasn't sure as to a "good" RF level to use<br>
with direct cabling!<br>
<br>
I also have 10/20 dB directional couplers and circulators if they<br>
might find use in a better configuration.<br>
<br>
Regards,<br>
<br>
Andrew<br>
<span class="HOEnZb"><font color="#888888"><br>
--<br>
Andrew Back<br>
<a href="http://carrierdetect.com" target="_blank">http://carrierdetect.com</a><br>
<br>
</font></span></blockquote></div><br></div>