<div>Hi,</div><div> </div><div>I have an ipaccess nanobts model 165AU.  I have followed the instructions for GPRS on the OpenBSC with a fresh install of Ubuntu 11.10:</div><div> </div><div><a href="http://openbsc.osmocom.org/trac/wiki/OpenBSC_GPRS">http://openbsc.osmocom.org/trac/wiki/OpenBSC_GPRS</a></div>
<div> </div><div>By adding the IMSIs for two GPRS capable handsets to the database and assigning extensions, the phones will attach and I can make calls between the handsets.</div><div> </div><div>However, there seems to be no functionality related to GPRS.  A couple of of different iPhones in GPRS field test mode won't pick up GPRS-related parameters in "filed test mode", such as they won't see different values I try for T3192 timer or DRC Timer Max. Note that I see changes I try for these parameters (T3192 and DRC Timer Max) sent to the nanobts from the wireshark packet captures.  These same iPhones can make phone calls through the nanoBTS/OpenBSC.</div>
<div> </div><div>Probably, the most significant underlying issue is that I don't see the SGSN IP address ever sent to the nanoBTS anywhere in the Wireshark packet capture.  It's clearly set in my configuration line "gprs nsvc 0 remote ip 192.168.XXX.YYY", and again I'm using an exact copy of the instructions linked above.  So, GPRS clearly won't work without the nanoBTS "knowing" the SGSN.  I do see the link between SGSN and GGSN, and the SGSN/GGSN both "up", but no traffic of course between the nanoBTS and SGSN.</div>
<div> </div><div>Note that I also did some searching and I saw one posting where the configuration line "gprs mode gprs" should be "gprs mode egprs", but that didn't make any difference.  Does anyone have suggestions of what might be wrong or what I should look at?</div>
<div> </div><div>Thanks, John</div>