<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">Hello Dieter,<div><br></div><div>I tried it several times,</div><div>and left the BTS on over night.</div><div>The LMT cable wasn't always plugged in.</div><div>When I boot up the BTS it always says that the second TRX</div><div>has Load and the first not.</div><div>If I try to bring up the BTS with your SW under Win.</div><div>I get the Abis Link Up but when I try the Load DB I get some</div><div>error messages on LMT.</div><div>Then the second TRX goes down to No Load.</div><div>And this is the condition until I reboot the BTS.</div><div>Maybe its a software issue?</div><div><br></div><div>Best regards</div><div>Björn</div><div><br></div><div><br><div><div>Am 23.04.2009 um 08:19 schrieb Dieter Spaar:</div><br class="Apple-interchange-newline"><blockquote type="cite"><div>Hello Bjoern,<br><br><blockquote type="cite">I finally got time to try out my BTS.<br></blockquote><blockquote type="cite">When I looked at the LMT I was confused about the<br></blockquote><blockquote type="cite">"MBCCU0: No Load" which seems to be the TRX0 ?<br></blockquote><br>Probably this is a similar problem I have with my BS-11, when<br>turning on the cold BS-11 the first time, frequently the firmware<br>load for TRX0 fails. Most certainly this comes from a hardware<br>problem (maybe aged capacitors ?).<br><br>I have to restart (turn off and on) the BS-11 a few times till it<br>works. If the unit has warmed up, I never saw this problem till now.<br><br>I also made the experience that it could help if no LMT cable (serial<br>cable) is attached so I usually try it this way: Turn the BS-11 on<br>without the LMT cable plugged in (at the BS-11 side) and after a<br>while (around 5 to 10 minutes) check if the firmware for TRX0 is<br>loading or is already loaded. If it fails, unplug the LMT cable,<br>turn the BS-11 off and try again. I am not really sure about the<br>effect of the LMT cable, but maybe the cable receives noise.<br><br>Best regards,<br> Dieter<br>-- <br>Dieter Spaar, Germany <a href="mailto:spaar@mirider.augusta.de">spaar@mirider.augusta.de</a><br><br></div></blockquote></div><br><div> <span class="Apple-style-span" style="border-collapse: separate; color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0; "><div style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><div><div>- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -</div><div>Björn Heller</div><div>Jabber: <a href="mailto:tec@jabber.hellercom.de">tec@jabber.hellercom.de</a></div></div></div></span> </div><br></div></body></html>