This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Sebastian Mauer mauimauer at gmail.comHello there, In my lab I have access to an ip.access nanoBTS 165AU which I have setup with OsmoBSC. Sending SMS between my two test handsets (Nokia 105) are working fine, however it seems there is a problem when making calls. From the logs it seems the radio is unable to assign a TCH_F channel. Any idea what could be causing this and how I would debug this further? Cheers, Sebastian <0003> abis_rsl.c:1533 (bts=0) CHAN RQD: reason: call re-establishment (ra=0x49, neci=0x01, chreq_reason=0x02) <000f> lchan_select.c:262 lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{UNUSED}: (type=SDCCH) Selected <000f> lchan_fsm.c:636 lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{WAIT_TS_READY}: (type=SDCCH) Activation requested: FOR_MS_CHANNEL_REQUEST voice=no MGW-ci=none type=SDCCH tch-mode=SIGNALLING encr-alg=A5/0 ck=none <0007> osmo_bsc_sigtran.c:297 Initializing resources for new SCCP connection to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP... <0007> osmo_bsc_sigtran.c:343 Opening new SCCP connection (id=4) to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP <0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP COMMON ID <0007> osmo_bsc_bssap.c:1251 Rx MSC DTAP, SAPI: RR/MM/CC CHAN: 0 <0007> gsm_08_08.c:567 Tx MSC DTAP LINK_ID=0x00 <0007> osmo_bsc_sigtran.c:383 Tx MSC: DTAP <0007> osmo_bsc_bssap.c:1251 Rx MSC DTAP, SAPI: RR/MM/CC CHAN: 2 <0007> osmo_bsc_bssap.c:1110 Rx MSC UDT BSSMAP PAGING <0007> osmo_bsc_bssap.c:126 (msc0) Paging: subscr-IMSI-901700000050081-TMSI-0x06e8ff82: (bts0) Paging on LAC 1 <0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP ASSIGNMENT REQ <000f> lchan_select.c:262 lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{UNUSED}: (type=TCH_F) Selected <0011> assignment_fsm.c:570 assignment(msc0-conn4_subscr-IMSI-901700000050080-TMSI-0xbf4aa84d_0-0-2-TCH_F-0)[0xaaaadc43e930]{WAIT_LCHAN_ACTIVE}: (bts=0,trx=0,ts=2,ss=0) Starting Assignment: chan_mode=SPEECH_V1, chan_type=FR, aoip=yes MSC-rtp=192.168.148.159:4074 (osmux=no) <000f> lchan_fsm.c:636 lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_TS_READY}: (type=TCH_F) Activation requested: FOR_ASSIGNMENT voice=yes MGW-ci=new type=TCH_F tch-mode=SPEECH_V1 encr-alg=A5/0 ck=none <000f> lchan_fsm.c:81 lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_RLL_RTP_ESTABLISH}: (type=TCH_F) lchan-rtp failure in state WAIT_IPACC_CRCX_ACK: Received NACK on IPACC CRCX <000f> lchan_fsm.c:81 lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_RLL_RTP_ESTABLISH}: (type=TCH_F) lchan allocation failed in state WAIT_RLL_RTP_ESTABLISH: Failed to setup RTP stream: LCHAN_EV_RTP_ERROR in state WAIT_RLL_RTP_ESTABLISH <000f> lchan_fsm.c:116 lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_RLL_RTP_ESTABLISH}: (type=TCH_F) Signalling Assignment FSM of error (lchan allocation failed in state WAIT_RLL_RTP_ESTABLISH: Failed to setup RTP stream: LCHAN_EV_RTP_ERROR in state WAIT_RLL_RTP_ESTABLISH ) <0011> assignment_fsm.c:821 assignment(msc0-conn4_subscr-IMSI-901700000050080-TMSI-0xbf4aa84d_0-0-2-TCH_F-0)[0xaaaadc43e930]{WAIT_RR_ASS_COMPLETE}: (bts=0,trx=0,ts=2,ss=0) Assignment failed in state WAIT_RR_ASS_COMPLETE, cause RADIO INTERFACE MESSAGE FAILURE: Failed to activate lchan (bts=0,trx=0,ts=2,ss=0) <0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: ASSIGNMENT FAIL <0011> assignment_fsm.c:148 assignment(msc0-conn4_subscr-IMSI-901700000050080-TMSI-0xbf4aa84d_0-0-2-TCH_F-0)[0xaaaadc43e930]{WAIT_RR_ASS_COMPLETE}: (bts=0,trx=0,ts=2,ss=0) Assignment failed <0007> osmo_bsc_bssap.c:1251 Rx MSC DTAP, SAPI: RR/MM/CC CHAN: 2 <0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP CLEAR COMMAND <0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: CLEAR COMPLETE <0005> paging.c:84 (bts=0) Going to send paging commands: subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 0) <000f> gsm_04_08_rr.c:1021 lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{WAIT_BEFORE_RF_RELEASE}: (type=SDCCH) Got data in non active state, discarding. <0005> paging.c:84 (bts=0) Going to send paging commands: subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 1) <0005> paging.c:84 (bts=0) Going to send paging commands: subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 2) <0003> abis_rsl.c:1533 (bts=0) CHAN RQD: reason: answer to paging (ra=0x9f, neci=0x01, chreq_reason=0x01) <000f> lchan_select.c:262 lchan(0-0-0-CCCH_SDCCH4-1)[0xaaaadc425390]{UNUSED}: (type=SDCCH) Selected <000f> lchan_fsm.c:636 lchan(0-0-0-CCCH_SDCCH4-1)[0xaaaadc425390]{WAIT_TS_READY}: (type=SDCCH) Activation requested: FOR_MS_CHANNEL_REQUEST voice=no MGW-ci=none type=SDCCH tch-mode=SIGNALLING encr-alg=A5/0 ck=none <0005> paging.c:84 (bts=0) Going to send paging commands: subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 3) <0007> osmo_bsc_sigtran.c:297 Initializing resources for new SCCP connection to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP... <0007> osmo_bsc_sigtran.c:343 Opening new SCCP connection (id=5) to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP <0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP COMMON ID <0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP CLEAR COMMAND <0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: CLEAR COMPLETE <0003> abis_rsl.c:1533 (bts=0) CHAN RQD: reason: answer to paging (ra=0x88, neci=0x01, chreq_reason=0x01) <000f> lchan_select.c:262 lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{UNUSED}: (type=SDCCH) Selected <000f> lchan_fsm.c:636 lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{WAIT_TS_READY}: (type=SDCCH) Activation requested: FOR_MS_CHANNEL_REQUEST voice=no MGW-ci=none type=SDCCH tch-mode=SIGNALLING encr-alg=A5/0 ck=none <0007> osmo_bsc_sigtran.c:297 Initializing resources for new SCCP connection to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP... <0007> osmo_bsc_sigtran.c:343 Opening new SCCP connection (id=6) to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP <0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP COMMON ID <0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP CLEAR COMMAND <0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: CLEAR COMPLETE