This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Andrew Back andrew at carrierdetect.comHello, I've had success with running a NITB based on the new architecture fine when everything is on one host. However, I'd now like to split this across multiple hosts. I have one host dedicated to running osmo-stp and this appears to bind to the IP specified. However, the instance of osmo-bsc running on another host always fails to connect and I think, despite configuring to use a remote STP, it's trying localhost. Packages installed from Debian 9.0/latest repo. Configs and osmo-bsc output below. Any pointers as to where I'm going wrong would be much appreciated. Regards, Andrew // **** osmo-bsc output: $ sudo /usr/bin/osmo-bsc -c /etc/osmocom/osmo-bsc.cfg <001d> osmo_ss7.c:1269 0: ASP Restart for server not implemented yet! % GPRS not enabled on this BTS % GPRS not enabled on this BTS % GPRS not enabled on this BTS % GPRS not enabled on this BTS % GPRS not enabled on this BTS % GPRS not enabled on this BTS % Line 0 already exists <0011> telnet_interface.c:104 telnet at 10.1.1.7 4242 <0013> input/ipaccess.c:853 enabling ipaccess BSC mode on 10.1.1.7 with OML 3002 and RSL 3003 TCP ports <0018> control_if.c:863 CTRL at 127.0.0.1 4249 <0008> osmo_bsc_sigtran.c:427 Initializing SCCP connection to MSC msc-0 <0008> osmo_bsc_sigtran.c:437 CS7 Instance identifier, A-Interface: 0 <001e> sccp_user.c:397 msc-0: Using SS7 instance 0, pc:0.0.2 <001e> sccp_user.c:411 msc-0: Creating AS instance <001e> sccp_user.c:421 msc-0: Using AS instance as-clnt-msc-0 <001e> sccp_user.c:426 msc-0: Creating default route <001e> sccp_user.c:446 msc-0: Creating ASP instance <0011> socket.c:266 unable to connect socket: (null):2905: Connection refused <0011> socket.c:279 no suitable remote addr found for: (null):2905 <001d> osmo_ss7.c:1253 0: Unable to open stream client for ASP asp-clnt-msc-0 <001e> sccp_user.c:481 msc-0: Using ASP instance asp-clnt-msc-0 <001e> sccp_user.c:484 msc-0: Creating SCCP instance <0008> osmo_bsc_sigtran.c:480 (msc-0) A-interface: local (BSC) SCCP address: RI=SSN_PC,PC=0.0.2,SSN=BSSAP <0008> osmo_bsc_sigtran.c:482 (msc-0) A-interface: remote (MSC) SCCP address: RI=SSN_PC,PC=0.0.1,SSN=BSSAP <0013> input/ipa.c:265 accept()ed new link from 10.1.1.8 to port 3002 <0005> abis_nm.c:506 BTS0 feature 'EGPRS' reported via OML does not match statically set feature: 0 != 1. Please fix. <0005> abis_nm.c:506 BTS0 feature 'OML Alerts' reported via OML does not match statically set feature: 1 != 0. Please fix. <0005> abis_nm.c:506 BTS0 feature 'Fullrate speech V1' reported via OML does not match statically set feature: 1 != 0. Please fix. <0005> abis_nm.c:506 BTS0 feature 'Halfrate speech V1' reported via OML does not match statically set feature: 1 != 0. Please fix. <0005> abis_nm.c:506 BTS0 feature 'Fullrate speech EFR' reported via OML does not match statically set feature: 1 != 0. Please fix. <0005> abis_nm.c:506 BTS0 feature 'Fullrate speech AMR' reported via OML does not match statically set feature: 1 != 0. Please fix. <0005> abis_nm.c:506 BTS0 feature 'Halfrate speech AMR' reported via OML does not match statically set feature: 1 != 0. Please fix. <0005> abis_nm.c:573 OC=BTS(01) INST=(00,ff,ff): BTS0: ARI reported sw[0/2]: osmobts is 0.8.1 <0005> abis_nm.c:445 BTS0 reported variant: omso-bts-trx <0005> abis_nm.c:467 BTS0 Attribute Manufacturer Dependent State is unreported <0005> abis_nm.c:573 OC=BTS(01) INST=(00,ff,ff): BTS0: ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown <0005> abis_nm.c:2809 IPA RSL CONNECT IP=0.0.0.0 PORT=3003 STREAM=0x00 <0013> input/ipa.c:265 accept()ed new link from 10.1.1.8 to port 3003 <0004> bsc_init.c:333 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 868 using MCC-MNC 901-70 LAC=23 CID=0 BSIC=63 <0004> abis_rsl.c:2502 (bts=0,trx=0,ts=2,pchan=TCH/F_TCH/H_PDCH as NONE): GPRS mode is 'none': not activating PDCH. <0004> abis_rsl.c:2502 (bts=0,trx=0,ts=3,pchan=TCH/F_TCH/H_PDCH as NONE): GPRS mode is 'none': not activating PDCH. <0004> abis_rsl.c:2502 (bts=0,trx=0,ts=4,pchan=TCH/F_TCH/H_PDCH as NONE): GPRS mode is 'none': not activating PDCH. <0004> abis_rsl.c:2502 (bts=0,trx=0,ts=5,pchan=TCH/F_TCH/H_PDCH as NONE): GPRS mode is 'none': not activating PDCH. <0004> abis_rsl.c:2502 (bts=0,trx=0,ts=6,pchan=TCH/F_TCH/H_PDCH as NONE): GPRS mode is 'none': not activating PDCH. <0008> a_reset.c:92 A-RESET(msc-0)[0x1d6fff0]{DISC}: (re)sending BSSMAP RESET message... <0008> osmo_bsc_sigtran.c:92 Sending RESET to MSC: RI=SSN_PC,PC=0.0.1,SSN=BSSAP <001d> m3ua.c:507 XUA_AS(as-clnt-msc-0)[0x1d6f7e8]{AS_DOWN}: Event AS-TRANSFER.req not permitted <0008> a_reset.c:92 A-RESET(msc-0)[0x1d6fff0]{DISC}: (re)sending BSSMAP RESET message... <0008> osmo_bsc_sigtran.c:92 Sending RESET to MSC: RI=SSN_PC,PC=0.0.1,SSN=BSSAP <001d> m3ua.c:507 XUA_AS(as-clnt-msc-0)[0x1d6f7e8]{AS_DOWN}: Event AS-TRANSFER.req not permitted <0011> socket.c:266 unable to connect socket: (null):2905: Connection refused <0011> socket.c:279 no suitable remote addr found for: (null):2905 <0008> a_reset.c:92 A-RESET(msc-0)[0x1d6fff0]{DISC}: (re)sending BSSMAP RESET message... <0008> osmo_bsc_sigtran.c:92 Sending RESET to MSC: RI=SSN_PC,PC=0.0.1,SSN=BSSAP <001d> m3ua.c:507 XUA_AS(as-clnt-msc-0)[0x1d6f7e8]{AS_DOWN}: Event AS-TRANSFER.req not permitted ^Csignal 2 received <0005> bsc_init.c:96 shutting down OML for BTS 0 **** osmo-bsc.cfg: e1_input e1_line 0 driver ipa ipa bind 10.1.1.7 cs7 instance 0 point-code 0.0.2 asp circ-OsmoBSC 2905 0 m3ua remote-ip 10.1.1.5 sccp-address msc_remote point-code 0.0.1 line vty bind 10.1.1.7 msc msc-addr msc_remote network network country code 901 mobile network code 70 bts 0 type sysmobts band GSM-1800 location_area_code 23 ip.access unit_id 1800 0 gprs mode none gprs nsvc 0 remote ip 192.168.0.9 gprs nsvc 0 remote udp port 23000 gprs nsvc 0 local udp port 23000 gprs nsvc 0 nsvci 1800 gprs nsei 1800 gprs cell bvci 1800 trx 0 rf_locked 0 arfcn 868 nominal power 23 timeslot 0 phys_chan_config CCCH+SDCCH4 timeslot 1 phys_chan_config SDCCH8 timeslot 2 phys_chan_config TCH/F_TCH/H_PDCH timeslot 3 phys_chan_config TCH/F_TCH/H_PDCH timeslot 4 phys_chan_config TCH/F_TCH/H_PDCH timeslot 5 phys_chan_config TCH/F_TCH/H_PDCH timeslot 6 phys_chan_config TCH/F_TCH/H_PDCH timeslot 7 phys_chan_config PDCH e1_input e1_line 0 driver ipa msc 0 mgw remote-ip 10.1.1.6 mgw remote-port 2427 allow-emergency deny codec-list hr3 **** osmo-stp.cfg: log stderr logging filter all 1 logging color 1 logging print category 1 logging timestamp 0 logging level lss7 debug logging level lsccp debug logging level lsua debug logging level lm3ua debug cs7 instance 0 xua rkm routing-key-allocation dynamic-permitted listen m3ua 2905 accept-asp-connections dynamic-permitted local-ip 10.1.1.5 listen sua 14001 local-ip 10.1.1.5 line vty bind 10.1.1.5