multiple phy with osmo-trx

[Sipos Csaba]

Hi Tom,

> There is a UHD version requirement to clock the B200/B210 below 5 MHz

Can you tell which version it is?

I am using 3.9.4

Regards,
Csaba

----- Eredeti üzenet -----
Feladó: "Tom Tsou" <tom at tsou.cc>
Címzett: "Max" <msuraev at sysmocom.de>
Másolatot kap: "OpenBSC Mailing List" <openbsc at lists.osmocom.org>
Elküldött üzenetek: Szerda, 2016. Augusztus 10. 19:26:26
Tárgy: Re: multiple phy with osmo-trx

On Wed, Aug 10, 2016 at 6:42 AM, Max <msuraev at sysmocom.de> wrote:
> sudo chrt 20 ./Transceiver52M/osmo-trx -m -c 2 -g
>
> linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.004-0-unknown
>
...
> -- Asking for clock rate 3.200000 MHz
> UHD Warning:
>     The requested master_clock_rate 3.200000 MHz exceeds bounds imposed
> by UHD.
>     The master_clock_rate has been forced to 5.000000 MHz.

There is a UHD version requirement to clock the B200/B210 below 5 MHz,
which is preferred for timing reasons.

I am looking at the versioning. UHD master is obviously up to date.

  -TT