This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Sipos Csaba sipos.csaba at kvk.uni-obuda.huThanks Ivan, Will try that and report back. Regards, Csaba ----- Eredeti üzenet ----- Feladó: "Ivan Kluchnikov" <Ivan.Kluchnikov at fairwaves.ru> Címzett: "Sipos Csaba" <sipos.csaba at kvk.uni-obuda.hu> Másolatot kap: "Alexander Chemeris" <alexander.chemeris at gmail.com>, "OpenBSC Mailing List" <openbsc at lists.osmocom.org> Elküldött üzenetek: Vasárnap, 2015. Július 26. 10:56:51 Tárgy: Re: Using GPRS Hi Sipos, Omar, You should use the following branches: libosmocore branch master libosmo-abis branch master osmo-trx branch fairwaves/master osmo-bts branch fairwaves/master ( use ./configure --enable-trx) openbsc branch fairwaves/master osmo-pcu branch master (use ./configure --enable-sysmocom-bts ) openggsn branch master Also if you use the same machine for sgsn, bts and pcu, you should change openbsc.cfg, instead of: gprs nsvc 0 local udp port 23000 gprs nsvc 0 remote udp port 23000 use different ports, for example: gprs nsvc 0 local udp port 5948 gprs nsvc 0 remote udp port 23000 -- Regards, Ivan Kluchnikov. http://fairwaves.ru