Compiling LCR for OpenBSC

historical

Hi Andreas, extreamlly sorry for the blind question.

I didnt do autogen to create the configure.

Extreamly sorry again.

Rgds
Nik

On Mon, Mar 5, 2012 at 10:19 AM, Nik Pakar <nikpakar at gmail.com> wrote:

> Hi Andreas, thousand times thanks for the correct hint.
>
> Its indeed crystal clear now.
>
> I have tried the git clone from  git://git.osmocom.org/openbsc.git  but
> noticed there is still misdn requirement and also no sip support.
>
> Then found from the maillist that i should clone
> git://git.osmocom.eu/openbsc.git instead of .org which shows sip
> interfaces on the source.
>
> How ever there is no configure file on this source.
>
> Am i still checking out from the wrong git ?
>
> Once again highly appreciate some light on the final bit.
>
> Thanks
> Nik
>
>
> On Mon, Mar 5, 2012 at 7:44 AM, jolly <andreas at eversberg.eu> wrote:
>
>> > Do I have to have mISDN for LCR even im not going to use any isdn
>> > interface ? Im trying to connect the NITB to LCR and LCR to asterisk
>> > all on ip.
>> >
>> > Thanks for any help.
>> >
>> > Rgds
>> > Nik
>> hi nik,
>>
>> you don't need misdn to use lcr with sip and gsm anymore. also you don't
>> need any patch. the lcr and openbsc compile out of the box supporting
>> each other. the howto is a bit outdated.
>>
>> try to compile the lcr from the git. don't use chan_lcr, since it still
>> works with isdn only. you need to setup a sip interface in interface.conf:
>>
>> [sip]
>> sip <local ip> <remote ip>[:<port>]
>> sip 10.0.0.12 10.0.0.34
>> earlyb no
>> tones no
>>
>> use asterisk machine for remote ip.  if you have asterisk on the same
>> machine, change the sip port of asterisk and use "remoteip:port".
>>
>> regards,
>>
>> andreas
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20120305/1132acf1/attachment.htm>