This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Thomas Ansorg kobayashi_maru at onlinehome.dehello list, may someone tell me, why my 2 bs-11 refuse to work as multidrop? i start with this config file: ! ! OpenBSC configuration saved from vty ! ! password foo ! line vty no login ! network network country code 262 mobile network code 10 short name Y-Phone long name Yodaphone handover 1 handover window rxlev averaging 10 handover window rxqual averaging 1 handover power budget interval 6 handover power budget hysteresis 4 bts 0 type bs11 band GSM900 cell_identity 1 location_area_code 1 training_sequence_code 7 base_station_id_code 63 oml e1 line 0 timeslot 1 sub-slot full oml e1 tei 25 trx 0 arfcn 121 max_power_red 0 rsl e1 line 0 timeslot 1 sub-slot full rsl e1 tei 1 timeslot 0 phys_chan_config CCCH+SDCCH4 e1 line 0 timeslot 1 sub-slot full timeslot 1 phys_chan_config SDCCH8 e1 line 0 timeslot 2 sub-slot 1 timeslot 2 phys_chan_config TCH/F e1 line 0 timeslot 2 sub-slot 2 timeslot 3 phys_chan_config TCH/F e1 line 0 timeslot 2 sub-slot 3 timeslot 4 phys_chan_config TCH/F e1 line 0 timeslot 3 sub-slot 0 timeslot 5 phys_chan_config TCH/F e1 line 0 timeslot 3 sub-slot 1 timeslot 6 phys_chan_config TCH/F e1 line 0 timeslot 3 sub-slot 2 timeslot 7 phys_chan_config TCH/F e1 line 0 timeslot 3 sub-slot 3 bts 1 type bs11 band GSM900 location_area_code 2 training_sequence_code 7 base_station_id_code 63 oml e1 line 1 timeslot 17 sub-slot full oml e1 tei 25 trx 0 arfcn 1 max_power_red 0 rsl e1 line 1 timeslot 17 sub-slot full rsl e1 tei 2 timeslot 0 phys_chan_config CCCH+SDCCH4 e1 line 1 timeslot 17 sub-slot full timeslot 1 phys_chan_config SDCCH8 e1 line 1 timeslot 18 sub-slot 1 timeslot 2 phys_chan_config TCH/F e1 line 1 timeslot 18 sub-slot 2 timeslot 3 phys_chan_config TCH/F e1 line 1 timeslot 18 sub-slot 3 timeslot 4 phys_chan_config TCH/F e1 line 1 timeslot 19 sub-slot 0 timeslot 5 phys_chan_config TCH/F e1 line 1 timeslot 19 sub-slot 1 timeslot 6 phys_chan_config TCH/F e1 line 1 timeslot 19 sub-slot 2 timeslot 7 phys_chan_config TCH/F e1 line 1 timeslot 19 sub-slot 3 each bs-11 works as single without problems. on both is trx0 activated. bts0 which is connected to pc is in multidrop config, the following bts1 in line config. but only bts0 is bootstrapped. where could the problem(s) be? T. -- Wer Rechtschreibfehler findet, darf sie behalten!