This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Andreas.Eversberg Andreas.Eversberg at versatel.dehi, check if you selected the right timeslot for d-channel: use "dslot=1" (old driver) or "layermask=0x02" (newer driver) when loading the hfcmulti.ko. use "--debug=DMI" and loop your line (connect pin 1 to pin 4, and pin 2 to pin 5). do you get activation-message when looping? if not, be sure to shift all jumpers toward the slot cover. if you see the loop, but no activation-message after booting BS11 (takes about 15 minutes), swap connector 1 and 2. one connector must be connected to pin 1 and 2, and the other to pin 4 and 5. andreas ________________________________ Von: openbsc-bounces at lists.gnumonks.org [mailto:openbsc-bounces at lists.gnumonks.org] Im Auftrag von Ihab el Bakri Gesendet: Donnerstag, 25. Februar 2010 14:59 An: openbsc Betreff: bsc_hack Hello there, finally, got nearly everything to work, but am unable to see the network on my mobile and am getting this message when running bsc_hack with a config file : DB: Database initialized. DB: Database prepared. 1 device found id: 0 Dprotocols: 00000018 Bprotocols: 0000000e protocol: 4 nrbchan: 30 name: hfc-e1.1 activate bchan activate bchan <000c> trau_frame.c:116 can't decode unknown TRAU Frame Type 0x00 Thank in advance Ihab el Bakri -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20100225/b5b398ab/attachment.htm>