This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Sylvain Munaut 246tnt at gmail.comAh, there is another hardcoded ip in nanobts_attr_nsvc0 in bsc_init.c You need to put the OpenBSC ip in there. On Sun, Nov 1, 2009 at 12:38 AM, Sylvain Munaut <246tnt at gmail.com> wrote: > I'm getting this which I'm pretty sure is bad : > > <0020> abis_nm.c:594 OC=GPRS CELL(f1) INST=(00,00,ff) STATE CHG: > OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked > <0020> abis_nm.c:594 OC=GPRS NSVC(f2) INST=(00,00,ff) IPACCESS(0xf6): > SET ATTR ACK > <0020> abis_nm.c:594 OC=GPRS NSVC(f2) INST=(00,00,ff) STATE CHG: > OP_STATE=Disabled AVAIL=OK(ff) ADM=Unlocked > bootstrapping RSL for BTS/TRX (0/0) using MCC=901 MNC=55 BSIC=63 TSC=7 > <0010> abis_rsl.c:1449 channel=(bts=0,trx=0,ts=7) chan_nr=0x0f IPAC_PDCH_ACT > <0010> abis_rsl.c:997 channel=(bts=0,trx=0,ts=7) chan_nr=0x0f IPAC PDCH ACT ACK > <0020> abis_nm.c:594 OC=GPRS NSVC(f2) INST=(00,00,ff) Failure Event > Report Type=communication failure Severity=critical failure > <0020> abis_nm.c:594 OC=GPRS NSVC(f2) INST=(00,00,ff) STATE CHG: > OP_STATE=Disabled AVAIL=Failed(01) > > It should go further than that shouldn't it ? > > Sylvain >