This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Holger Adams holger at kernreaktor.orgHi Dieter, Am Do, 19.03.2009, 13:03, schrieb Dieter Spaar: > Hello Holger, > > On Thu, 19 Mar 2009 11:02:05 +0100 (CET), "Holger Adams" > <holger at kernreaktor.org> wrote: >> >> Sniffed Abis-Link (with K1103): >> http://www.kernreaktor.org/stuff/bs11-e1.txt > > I am not familiar with the K1103. But if I don't misunderstand the traces, > everything should be fine. After the database has been sent to the BS-11, > you won't see any additional traffic on the E1 interface as long as there > is no phone registering to the BS-11 or you advice OpenBSC to send > something > to the BS-11. You should now be able to see the network with a phone. > > If you want to generate some E1 traffic without a phone, you can > press (or release) the instrusion switch, this should result in a report > sent from the BS-11. However I don't know how long the delay is between > actually changing the switch state and the resulting report. Hm, I pressed the intrusion switch but 'openbsc' didn't report it. Here's the logfile with all debug options enabled: http://www.kernreaktor.org/stuff/bs11_bschack_debug.txt The programm stucks at 'TX TEI(1): 10 1a 1e 06 0b 00 0b 06 1e 00 01 00 f1 10 00 01 28 ff' but continues playing LAPD-RR-Pingpong. Should I try to reflash the firmware? I also tried restarting 'openbsc' a few times. Best Regards, Holger