This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Dieter Spaar spaar at mirider.augusta.deOn Wed, 17 Jun 2009 17:22:12 CEST, "Dieter Spaar" <spaar at mirider.augusta.de> wrote: > > A quick idea without having verified it: You can try to > decrease NM_ATT_BS11_RADIO_MEAS_GRAN which is currently set > to 254 (0xFE). The unit seems to be "SACCH multiframes" which > is about 470 ms. If this attribute and its value means that a > report should only be sent about every 120 seconds, it would take > quite some time to see the report. However I am not 100% if this > attribute really has this meaning. I verified it, decreasing NM_ATT_BS11_RADIO_MEAS_GRAN to a smaller value (I used 5 which means about 2.4 seconds) will show the measurement results as expected. The default setting of 254 is just too large so that you normally won't notice them during testing. Best regards, Dieter -- Dieter Spaar, Germany spaar at mirider.augusta.de