This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
hotshot hotshot at koeln.ccc.de-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I tested rev. 458 and was able to switch the PLL mode from E1-locked to standalone. Unfortunately I see the same behavior (even with restarting the BS-11) as in E1-locked ('hfcmulti' and 'hfcmulti port=0x200) - a network scan shows either your BS-11 or the other networks and only sometimes you see all networks This time I found the local net after 5-10 minutes with a Nokia 9300i and E70. My 6110 could only see the other networks. Voice works fine in this revision, there is only some delay. But I observed some strange behaviour using call hold - when you activate it on a phone the other party can still hear you. :) Regards, Christian Harald Welte wrote: >>>> We could add this setting to the bs11_config program so people can try if >>>> their E1 clock or their [10 years uncalibrated] BS11 internal oscillator is >>>> better. >> >> However, since it doesn't change any common code paths, I have committed it. >> It would be great if somebody could do some testing if this actually works. > I've tested (+fixed) it now. 'query' now also shows the current PLL Mode > configuration (as of SVN rev. 455) > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkn4+zwACgkQGLhuJlltuu8X0QCgjIy1NeEoze1BzD7IpzfIF904 sQwAnjaAGqmtGLLljVPgB98KNmUEck+A =PzPj -----END PGP SIGNATURE-----