<div dir="ltr">I've been trying to use OP25 to listen to a Project 25 Phase 2 system, and so far all I've managed to get is weird corrupted audio out of it.  It almost sounds like the audio isn't being decoded at all, and it's just playing me the raw bit stream.<div><br></div><div>I'm using:</div><div><br></div><div># ./rx.py --nocrypt -f 770081250 -N 'LNA:47' -2 -T trunk.tsv -l http:<a href="http://192.168.5.134:4445">192.168.5.134:4445</a> -v 8 --args 'rtl' -S 274000  -w -W 192.168.5.224  -q 2 -D fsk4<br></div><div><br></div><div>(have tried with and without the fsk4).  </div><div><br></div><div>I do see debug output that seems to indicate it's following the channel properly: <a href="https://gist.githubusercontent.com/devicenull/1086fe103f751be9103a86496b46709a/raw/920fa584beab0ff3ae7f0735fe6a6750023440d3/gistfile1.txt">https://gist.githubusercontent.com/devicenull/1086fe103f751be9103a86496b46709a/raw/920fa584beab0ff3ae7f0735fe6a6750023440d3/gistfile1.txt</a></div><div><br></div><div>I'm listening in on a remote device with vlc: vlc.exe --clock-jitter=500 --network-caching=0 --demux=rawaud --rawaud-channels 1 --rawaud-samplerate 8000 udp://@:23456</div><div><br></div><div>The machine I'm running OP25 on doesn't really have a sound setup (it's a server, no GUI or speakers), so I can't really confirm if the issue is with the sound or VLC.</div><div><br></div><div>Any suggestions?</div></div>