This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev at yahoogroups.comI'm stuck then , it's a lot of work but I would reinstall op25. Maybe somebody with a bit more experience could weigh in and help us? -------------------------------------------- On Sun, 2/5/17, Brett Friermood brett.friermood at gmail.com [op25-dev] <op25-dev at yahoogroups.com> wrote: Subject: Re: [op25-dev] Unable to Run scope.py To: op25-dev at yahoogroups.com Received: Sunday, February 5, 2017, 8:50 AM No go. Still the same error using both the "-A" and "-a" arguments for audio input. With no SDR plugged in, or any audio arguments, I get the expected "FATAL: No supported devices found to pick from." warning but also still get the GUI error lines showing up afterward. On Tue, Jan 31, 2017 at 9:45 PM, Sean Kealy superstardodge at yahoo.com [op25-dev] <op25-dev at yahoogroups.com> wrote: > Almost seems like it doesn't like your RTL , try running scope with the if > or disc tap command and see if it comes up > > > > -------------------------------------------- > On Tue, 1/31/17, Brett Friermood brett.friermood at gmail.com [op25-dev] < > op25-dev at yahoogroups.com> wrote: > > Subject: Re: [op25-dev] Unable to Run scope.py > To: op25-dev at yahoogroups.com > Received: Tuesday, January 31, 2017, 6:41 PM > > I did. "sudo rmmod > dvb_usb_rtl28xxu" outputs "rmmod: ERROR: Module > dvb_usb_rtl28xxu is not currently > loaded" > > This was a > fresh install of OP25 on this computer. I am able to run > osmocom_fft without issue. > > On Tue, Jan 31, 2017 at 8:19 PM, Sean Kealy superstardodge at yahoo.com > [op25-dev] <op25-dev at yahoogroups.com> > wrote: > > > > > > > Did you do the remove > modprobe command? > > > > > > On Tuesday, January > 31, 2017 2:18 PM, "Brett Friermood > > > brett.friermood at gmail.com > [op25-dev]" <op25-dev at yahoogroups.com> > wrote: > > > > > > > > I may have > misinterpreted your question thinking you were asking if > the > > error comes up rather than asking > if the GUI comes up. > > > > If I run scope.py without any arguments I > still get the same error. Any > > manner of > command line arguments produces the same error. > > > > On Sun, Jan 29, 2017 > at 10:27 AM, Sean Kealy superstardodge at yahoo.com > > [op25-dev] <op25-dev at yahoogroups.com> > wrote: > > > > > > > > If u run just > ./scope.py does it come up > > > > > > > ------------------------------ -------------- > > On Sat, 1/28/17, Brett Friermood brett.friermood at gmail.com > [op25-dev] < > > op25-dev at yahoogroups.com> > wrote: > > > > Subject: > [op25-dev] Unable to Run scope.py > > To: > op25-dev at yahoogroups.com > > Received: Saturday, January 28, 2017, > 2:06 PM > > > > BretJust > built OP25 on > > Debian Jessie without > issue. However when I try to > > run a > simple scope command it fails with the > > following error: > > > > Traceback > > (most > recent call last): > > File > > "./scope.py", line 2751, in > <module> > > app = > stdgui2.stdapp(p25_rx_block, > > > "APCO P25 Receiver", 3) > > > File > > "/usr/lib/python2.7/dist- > packages/gnuradio/wxgui/ stdgui2.py", > > line > > 46, in > __init__ > > > > > wx.App.__init__ (self, redirect=False) > > > > File > > "/usr/lib/python2.7/dist- > packages/wx-3.0-gtk2/wx/_core. py", > > line > > 8628, in > __init__ > > > > > self._BootstrapApp() > > File > > "/usr/lib/python2.7/dist- > packages/wx-3.0-gtk2/wx/_core. py", > > line > > 8196, in > _BootstrapApp > > return > _core_.PyApp__BootstrapApp(* args, > > > **kwargs) > > File > > "/usr/lib/python2.7/dist- > packages/gnuradio/wxgui/ stdgui2.py", > > line > > 49, in > OnInit > > > > frame = > stdframe (self.top_block_maker, self.title, > > self._nstatus) > > > File > > "/usr/lib/python2.7/dist- > packages/gnuradio/wxgui/ stdgui2.py", > > line > > 76, in > __init__ > > > > > self.panel = stdpanel (self, self, top_block_maker) > > File > > > "/usr/lib/python2.7/dist- packages/gnuradio/wxgui/ > stdgui2.py", > > line > > 98, in __init__ > > > > self.top_block = top_block_maker (frame, > self, vbox, > > sys.argv) > > File "./scope.py", > > line 212, in __init__ > > > > > self.__init_gui(frame, panel, vbox) > > > File > > "./scope.py", line > 466, in __init_gui > > > self.frame.CreateStatusBar() > > > File > > "/usr/lib/python2.7/dist- > packages/wx-3.0-gtk2/wx/_ windows.py", > > line > > 615, in > CreateStatusBar > > return > > _windows_.Frame_ CreateStatusBar(*args, > **kwargs) > > wx._core.PyAssertionError: > C++ assertion > > > "!m_frameStatusBar" failed at > > ../src/common/framecmn.cpp( 381) in > > > > CreateStatusBar(): > recreating status bar > > in > > wxFrame > > > > > > The command I am > running is simply > > "./scope.py -f > 152.5925e6". Other > > references to > this error that I have been able > > to > find appeared to all be > > resolved > by > > adding or properly formatting the > NAC in the trunk.tsv > > file. > > Scope.py properly finds the SDR > > dongle, and will set the gain if I > provide > > the argument, but always > fails with this error > > and never opens > the GUI. I'm > > sure > > I'm missing something simple. > > > > > > Thanks, > > > > Brett > > > > > > > > > ------------------------------ ------ > > > Posted by: Sean Kealy <superstardodge at yahoo.com> > > ------------------------------ ------ > > > > > > > ------------------------------ ------ > > > > Yahoo Groups Links > > > > > > (Yahoo! ID required) > > > > <op25-dev-fullfeatured at yahoogroups.com> > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > Posted by: Sean Kealy <superstardodge at yahoo.com> > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20170205/3395a2c4/attachment.htm>