This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
Matt Ames matt.ames7bc@gmail.com [op25-dev] op25-dev at yahoogroups.comHi, Try running "./scope.py" from the command line. Cheers, Matt On 22 September 2016 at 10:58, joeeva at bellsouth.net [op25-dev] < op25-dev at yahoogroups.com> wrote: > > > Bare with a old Man( I'm anxious to get this working) > > I downloaded Ubuntu 14.04, never used Linux before > > I installed it along side windows 7, I used this method, pasted below to > install OP25 > > Everything looks like it installed correctly, happy first timer no errors > > I went into files, all seems to be there > > I have a RTL2832u device > > The local system I want to track is Phase 2 , Tdma, I believe > > control channel 858.43750 > > > How do I launch the program, scope.py is that correct > > I googled it, I found some things to try, > > 2 lines in command, no dice > > Is there a step by step anywhere, I can read. I've read and read, I know > its just me > > but I'm closer than I was 4 days ago > > > ?s (1)Do I launch by command prompt, is there an app to click on(2) how > do I put in put my control channel, in my files somewhere) > > just some basic questions for a newbie > > thanks for any help > > . > > This recipe has been tested on ubuntu 14.04 only, it is likely NOT to work > in either 12.04 or 16.04... > > First, use these commands to install the pre-reqs > > sudo apt-get update > sudo apt-get build-dep gnuradio > sudo apt-get install gnuradio gnuradio-dev gr-osmosdr librtlsdr-dev > libuhd-dev libhackrf-dev libitpp-dev libpcap-dev git > > > Second, use these commands to build and install OP25: [Note, the mkdir > build; cd build; cmake ../; make; sudo make install sequence is a > bog-standard form when source-building apps that utilize cmake.] > > > cd ~ > git clone git://op25.osmocom.org/op25.git > cd op25 > mkdir build > cd build > cmake ../ > make > sudo make install > sudo ldconfig > > > Finally you may need to use the command > > sudo rmmod dvb_usb_rtl28xxu > > to remove the DVB kernel module that conflicts with the RTL USB SDR. You > may also need to edit the system udev rules for the RTL -both are common > issues and you can search for the needed resources if the RTL isn't getting > recognized... Once this is all done (no longer a need to source any env > commands into the shell) you should be ready to invoke scope.py, which is > the principal OP25 GUI app... As a pre-check, you can also run the > osmocom_fft application (which should install as part of the pre-reqs) to > test basic RTL connectivity and rule out related problems before invoking > scope.py... > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20160922/787e752a/attachment.htm>