This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
Robert Klamp Jr. RobertKlamp at aol.comOk I have wireshark working but it does not capture any packets from the audio input. Now I should add that I haven't gotten OP25 to work correctly yet either I have been going at it all day and have made almost no headway. If anybody can tell me how to capture the data packets from the audio input it would help very much. Thanks, Bob From: op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] On Behalf Of Steve Glass Sent: Wednesday, January 30, 2013 9:45 PM To: op25-dev at yahoogroups.com Subject: RE: [op25-dev] OP25 and WireShark Help "Ok I tried to get wireshark working with OP25 today using the following command and received the errors below. Any help would be appreciated if I am missing something. bob at ubuntu:~/src/op25/python$ wireshark dumpcap: There are no interfaces on which a capture can be done dumpcap: There are no interfaces on which a capture can be done dumpcap: There are no interfaces on which a capture can be done dumpcap: There are no interfaces on which a capture can be done" You need to run wireshark with superuser privileges. This can be done by prefixing the command with "sudo" and typing in your password when asked. So you need to run: sudo wireshark and that should let you capture on the available interfaces. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20130130/e25420b8/attachment.htm>