This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
Andy Knitt andyknitt at gmail.comIt looks like imbe_decoder_factory.cc in OP25 defaults to 'software_imbe_decoder'. I manually changed the IMBE environment variable to "soft" and confirmed it with printenv, but I'm still getting a flat line at the output of the OP25 block. Any other ideas? Thanks, Andy On Mon, Apr 23, 2012 at 11:47 PM, Balint <balint256 at hotmail.com> wrote: > ** > > > I *still* haven’t checked out the latest code, but in my old code the > default voice frame output was (null?).**** > > There are options for file output, null, external (hardware) decoder and > internal decoder. You used to be able to spec this on the command line as > an environment variable:**** > > export IMBE=soft**** > > I changed my default to be the internal decoder (see > ‘imbe_decoder_factory.cc’).**** > > ** ** > > *From:* op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] *On > Behalf Of *Andy Knitt > *Sent:* Tuesday, 24 April 2012 12:45 PM > *To:* op25-dev at yahoogroups.com > *Subject:* [op25-dev] OP25 GRC - Almost but not quite working**** > > ** ** > > **** > > I have the OP25 GRC demo that Balint provided up and running. > Everything seems to working except I'm not getting any audio out of > the OP25 block. I'm getting the "four line" output from the dibit > output port when there is traffic on the channel, and the autotune > output is outputting data. However, no audio. I put a scope on the > audio output and it's a flat line at zero, even when the dibit output > is "four lines". Any tips on how to further troubleshoot? > > Thanks, > > Andy**** > > **** > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20120425/b78cb39d/attachment.htm>